홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → (3-(2-(3-Chlorophenyl)ethyl)-2-pyridinyl)(1-methyl-4-piperidinyl)methanone hydrochloride

HRID 542761
인쇄

반응식

HRID 542761 반응식
[Cl:1][C:2]1[CH:3]=[C:4]([CH2:8][CH2:9][C:10]2[C:11]([C:16]#N)=[N:12][CH:13]=[CH:14][CH:15]=2)[CH:5]=[CH:6][CH:7]=1.[CH3:18][N:19]1[CH2:24][CH2:23][CH2:22][CH2:21][CH:20]1[Mg]Cl.[OH2:27]>O1CCCC1>[ClH:1].[CH3:18][N:19]1[CH2:24][CH2:23][CH:22]([C:16]([C:11]2[C:10]([CH2:9][CH2:8][C:4]3[CH:5]=[CH:6][CH:7]=[C:2]([Cl:1])[CH:3]=3)=[CH:15][CH:14]=[CH:13][N:12]=2)=[O:27])[CH2:21][CH2:20]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 962WaterHCID 41232253-(2-(3-Chlorophenyl)ethyl)-2-pyridinecarbonitrileHCID 178480302HCID 178480302, 화합물

생성물 1

HCID 13920590(3-(2-(3-Chlorophenyl)ethyl)-2-pyridinyl)(1-methyl-4-piperidinyl)methanone hydrochloride

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매

반응 조건

온도
25 °C

실험 절차

To a solution of product of Step C above (118 g, 0.487 mole) in 1.2 L of dry tetrahydrofuran is added 395 mL (2.48 mole/liter, 0.585 mole, 1.2 eg.) of N-methyl-piperidyl magnesium chloride over about 15 minutes maintaining the temperature at 45° C.-50° C. by cooling with water as necessary. The reaction is maintained at 40° C. to 50° C. for about another 30 minutes. Completion of the reaction is determined by thin-layer chromatography. The reaction is quenched to pH below 2 with 2N hydrochloric acid and the resulting solution is stirred at about 25° C. for 1 hour. The bulk of the tetrahydrofuran is removed by distillation and the resulting solution is adjusted to pH 3.5 by the addition of aqueous sodium hydroxide. After cooling to 0° to 5° C., the crystalline hydrochloride salt product is filtered off, washed with ice cold water and dried to constant weight at 60° C. Yield: 168.2 g (HALC purity 94%), m.p. 183°-185° C., 89% of theory.

후처리

  1. temperaturemaintaining the temperature at 45° C.-50° C.
  2. temperatureThe reaction is maintained at 40° C. to 50° C. for about another 30 minutes
  3. customThe reaction is quenched to pH below 2 with 2N hydrochloric acid
  4. customThe bulk of the tetrahydrofuran is removed by distillation
  5. additionthe resulting solution is adjusted to pH 3.5 by the addition of aqueous sodium hydroxide
  6. temperatureAfter cooling to 0° to 5° C.
  7. filtrationthe crystalline hydrochloride salt product is filtered off
  8. washwashed with ice cold water
  9. customdried to constant weight at 60° C

출처 및 근거

ORD 기록
ord-95c6c80847194a98a9efb033bd9c3e4c
출처 데이터셋
uspto-grants-1987_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04659716

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트