홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Nitric Acid → 3-Acetylamino-adamantane-1-carboxylic acid

HRID 550858
인쇄

반응식

HRID 550858 반응식
[C:1]12([C:11]([OH:13])=[O:12])[CH2:10][CH:5]3[CH2:6][CH:7]([CH2:9][CH:3]([CH2:4]3)[CH2:2]1)[CH2:8]2.[N+]([O-])(O)=O.S(=O)(=O)(O)[OH:19].[C:23](#[N:25])[CH3:24]>O>[C:23]([NH:25][C:3]12[CH2:9][CH:7]3[CH2:6][CH:5]([CH2:10][C:1]([C:11]([OH:13])=[O:12])([CH2:8]3)[CH2:2]1)[CH2:4]2)(=[O:19])[CH3:24]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 944Nitric AcidHCID 1118Sulfuric AcidHCID 6342Acetonitrile2회HCID 132351-Adamantanecarboxylic acid

생성물 1

HCID 27697143-Acetylamino-adamantane-1-carboxylic acid수율 73%

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
0 °C

실험 절차

To a 10-L reactor was added 1-adamantanecarboxylic acid (503 g, 2.79 mol; TCI America, Wellesley Hills, Mass., USA) and 70% nitric acid (400 mL, 6.72 mol), and the resulting suspension was cooled at 0° C. with a recirculating chiller. To the mixture was slowly added 98% sulfuric acid (3.00 L, 55.5 mol) at such a rate that the temperature was kept below 10° C. Once the addition completed, acetonitrile (2.00 L, 38.5 mol) was added at such a rate that the temperature was kept below 10° C. After all the acetonitrile was added, the reaction was stirred at 0° C. for 1 hour. The crude reaction was then added to a 20-L reactor filled with about 10-L of ice mixed with a small amount of water and the resulting mixture was stirred and allowed to warm to room temperature. The solids were then filtered and washed with water. More solids precipitated from the acidic aqueous layer and these were filtered as well and washed with water. The combined solid material was then dried under high vacuum at 50° C. for 2 days to afford 432 g (73%) of the title compound, 3-acetylamino-adamantane-1-carboxylic acid, as a white solid.

후처리

  1. customwas kept below 10° C
  2. additionOnce the addition
  3. customwas kept below 10° C
  4. customThe crude reaction
  5. additionwas then added to a 20-L reactor
  6. stirringthe resulting mixture was stirred
  7. temperatureto warm to room temperature
  8. filtrationThe solids were then filtered
  9. washwashed with water
  10. customMore solids precipitated from the acidic aqueous layer
  11. filtrationthese were filtered as well and
  12. washwashed with water
  13. customThe combined solid material was then dried under high vacuum at 50° C. for 2 days

출처 및 근거

ORD 기록
ord-13aeac085c56400f94180bfb229ef5cb
출처 데이터셋
uspto-grants-2011_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07947680B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트