홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → 3-Bromo-2,6-dimethoxytoluene

HRID 555556
인쇄

반응식

HRID 555556 반응식
[CH3:1][O:2][C:3]1[CH:8]=[CH:7][CH:6]=[C:5]([O:9][CH3:10])[C:4]=1[CH3:11].[Br-:12].[Br-].O1CCOCC1.O>CCOCC>[Br:12][C:8]1[C:3]([O:2][CH3:1])=[C:4]([CH3:11])[C:5]([O:9][CH3:10])=[CH:6][CH:7]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 962WaterHCID 797552,6-DimethoxytolueneHCID 222259191,4-Dioxane dibromide

생성물 1

HCID 108897433-Bromo-2,6-dimethoxytoluene수율 100%

시약·촉매·용매 1

HCID 3283Diethyl Ether용매2회

실험 절차

To a solution of 2,6-dimethoxytoluene (50 g, 328.5 mmol) in ether (450 mL) was added freshly prepared dioxane dibromide in ether over 0.5 h. The mixture was stirred at room temperature for an additional 1.5 h and poured into a beaker containing water (500 mL). The aqueous layer was discarded and the ether layer was washed sequentially with water (2×500 mL), sodium bicarbonate (saturated aqueous) (2×500 mL), dried over sodium sulfate, and concentrated using a rotary evaporator to afford 76 g of 3-bromo-2,6-dimethoxytoluene as a colorless oil (100%). A cooling well was used to collect 300 mL of ammonia at −78° C., which was mixed with potassium (0.5 g) and ferric nitrate (0.5 g). Additional potassium (14.2 g, 364 mmol) was added at −78° C. portion-wise. The solution was stirred at −78° C. for 15 min. To this solution was slowly added 3-bromo-2,6-dimethoxytoluene (42 g, 182 mmol) in THF (100 mL). The resulting mixture was stirred at −78° C. for 3 h and then 0° C. for 1 h. The reaction was quenched by adding water (150 mL) and extracted with DCM (3×200 mL) to get a brown oil as the crude product. It was further purified by column chromatography to yield 22.1 g of 3,5-dimethoxy-4-methylaniline (73%). A solution of 3,5-dimethoxy-4-methylaniline (22.1 g, 132.3 mmol) in dioxane (380 mL) and water (380 mL) was mixed with potassium carbonate (45.6 g, 330.8 mmol) and (Boc)2O (34.6 g 158.8 mmol) and stirred at room temperature for 14 h. The reaction mixture was then extracted with DCM (3×100 mL) and concentrated using a rotary evaporator. The resulting solid residue was purified by column chromatography. A mixture of DCM-hexanes (20 mL-300 mL) was used to make a slurry and the solid was collected by filtration and washed with hexanes to provide 28.6 g of (3,5-dimethoxy-4-methyl-phenyl)-carbamic acid tert-butyl ester (81%). A solution of (3,5-dimethoxy-4-methyl-phenyl)-carbamic acid tert-butyl ester (28.6 g, 107.1 mmol) in carbon tetrachloride (450 mL) was mixed with NBS (19.05 g, 107.1 mmol) and AIBN (1.55 g, 9.37 mmol) and the mixture was stirred at 80° C. with the light on for 2 h. The reaction was quenched by adding water (150 mL) and extracted with DCM (3×100 mL), and concentrated to afford a solid residue. Further purification by column chromatography yielded 34.9 g of (2-bromo-3,5-dimethoxy-4-methyl-phenyl)-carbamic acid tert-butyl ester (94%). A solution of (2-bromo-3,5-dimethoxy-4-methyl-phenyl)-carbamic acid tert-butyl ester (34.9 g, 100.9 mmol) in carbon tetrachloride (450 mL) was mixed with NBS (21.5 g, 121.0 mmol) and AIBN (1.55 g, 9.37 mmol) and was stirred at 80° C. with the light on for 4 h. The reaction was then quenched by adding water (150 mL) and extracted with DCM (3×100 mL), and concentrated to afford a solid residue. Further purification by column chromatography yielded 39 g of (2-bromo-4-bromomethyl-3,5-dimethoxy-phenyl)-carbamic acid tert-butyl ester (91%). A solution of (2-bromo-4-bromomethyl-3,5-dimethoxy-phenyl)-carbamic acid tert-butyl ester (39 g, 91.8 mmol) in THF (600 mL) was mixed with morpholine (45 mL, 515.0 mmol) and stirred at room temperature for 7 h. The reaction was diluted with water (300 mL), extracted with DCM (3×200 mL), and concentrated using a rotary evaporator. The residue was further purified by column (SiO2, DCM/MeOH=20:1) to provide 35 g of (2-bromo-3,5-dimethoxy-4-morpholin-4-ylmethyl-phenyl)-carbamic acid tert-butyl ester (88%). A solution of (2-bromo-3,5-dimethoxy-4-morpholin-4-ylmethyl-phenyl)-carbamic acid tert-butyl ester (3 g, 6.94 mmol) in THF (150 mL) was mixed with NaH (0.333 g, 8.33 mmol) and stirred at room temperature for 1.5 h. The resulting mixture was cooled to −78° C. and mixed with nBuLi (3.33 mL, 8.33 mmol). The reaction was stirred for 1.5 h at −78° C. before addition of t-BuLi (8.16 mL, 13.88 mmol). The reaction was stirred at −78° C. for 1 h and carbon dioxide gas was then bubbled through for 8 h allowing the temperature to rise gradually to room temperature. The reaction was quenched by adding water (0.5 mL, 27.8 mmol) and concentrated using a rotary evaporator. The solid residue was made into slurry in minimal amount of MeOH and the solid was filtered off. The filtrate was then concentrated using a rotary evaporator and the solid was made into a slurry again in MeOH and filtered. After repeating two to three times, the filtrate was concentrated to yield 1.1 g of impure 6-tert-butoxycarbonylamino-2,4-dimethoxy-3-morpholin-4-ylmethyl-benzoic acid (40% crude yield).

후처리

  1. additionpoured into a beaker
  2. washthe ether layer was washed sequentially with water (2×500 mL), sodium bicarbonate (saturated aqueous) (2×500 mL)
  3. dry with materialdried over sodium sulfate
  4. concentrationconcentrated
  5. customa rotary evaporator

출처 및 근거

ORD 기록
ord-7825e2fc5b4444ee9aaf019371e5e289
출처 데이터셋
uspto-grants-2011_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08053440B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트