홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Toluene → 1-Indanol

HRID 564962
인쇄

반응식

HRID 564962 반응식
[CH2:1]1C2C(=CC=CC=2)C[C:2]1=[O:10].[C:11]1([CH3:17])[CH:16]=[CH:15][CH:14]=[CH:13][CH:12]=1>>[CH:2]1([OH:10])[C:16]2[C:11](=[CH:12][CH:13]=[CH:14][CH:15]=2)[CH2:17][CH2:1]1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 2

HCID 1140Toluene2회HCID 119832-Indanone

생성물 1

HCID 228191-Indanol

실험 절차

A 3-neck 500 mL round-bottomed flask fitted with a condenser and an addition funnel was charged with 2.62 g (0.11 mol) of Mg turnings and 20 mL of anhydrous diethyl ether. Slow addition of a solution of 25.10 g (0.09 mol) of 3,5-bis(trifluoromethyl) bromobenzene in diethyl ether (100 mL), followed by refluxing for 30 min, gave a brown-grey solution of the aryl Grignard reagent. The solution was cooled to room temperature (RT), filtered over a plug of Celite and evacuated to yield a brown oil. Toluene (40 mL) was added and the suspension cooled to 0° C. whereupon a solution of 2-indanone (9.22 g, 0.07 mol) in toluene (60 mL) was added dropwise to give a tan-brown slurry. This mixture was warmed to room temperature and stirred for an additional 3 hours. After cooling to 0° C. it was quenched with 150 mL of water, hexane (200 mL) added and the reaction mixture neutralized with 5M HCl. The organic layer was separated, and the aqueous layer was extracted with two 50-mL portions of hexane. The combined organic layers were washed with two 50-mL portions of brine and dried over anhydrous magnesium sulfate. After filtration over Celite, the solvent was removed under vacuo yielding 21.5 g (89% based on 2-indanone) of 2-(bis-3,5-trifluoromethylphenyl) indanol as an off-white solid. 1H NMR (CDCl3, 23 C., 400 MHz): d 8.05 (s, 2H), 7.80 (s, 1H), 7.5-7.0 (M, 4H), 3.41 (m, 4H), 2.21 (s, 1H, OH). Under argon, this alcohol (21.5 g, 0.06 mol) and p-toluene-sulfonic acid monohydrate (800 mg) were dissolved in toluene (250 mL) and the solution was heated to reflux for 6 hours to afford 14.4 g, (70%) of 2-(bis-3,5-(trifluoromethyl)-phenyl)indene upon recrystallization from diethyl ether/hexane at −18 C. 1H NMR (CDCl3, 23° C., 400 MHz): d 8.01 (s, 2H), Arf), 7.75 (s, 1H, Arf), 7.52 (d, J=7 Hz, 1H), 7.47 (d, J=7 Hz, 1H), 7.43 (s, 1H), 7.33 (dd, 2J=7 Hz, 1H), 7.27 (dd, 2J=7 Hz, 1H), 2.83 (s, 2H). 13C NMR (CDCl3, 23 C., 100 MHz): L144.3 (s), 143.1 (s), 138.0 (s), 132.1 (q,2JC-F=33 Hz), 130.1 (d, JC-H=167 Hz), 127.0 (dd), JC-H=160 Hz, 2JC-H=7 Hz), 126.0 (dd, JC-H=159 Hz, 2JC-H=7 Hz)m 125.2 (brd, JC-H=162 Hz), 123.9 (dd, JC-H=156 Hz, 2JC-H=9 Hz), 123.4 (q, JC-F=273 Hz, CF3), 121.8 (dd, Jc-H=160 Hz, 2JC-H=8 Hz), 120.6 (brd, JC-H=167 Hz), 38.9 (td, JC-H=127 Hz, 2JC-H=7 Hz, CH2). C,H analysis: Anal. Found (Calcd): C, 62.45 (62-20); H, 3.01 (3.07).

후처리

  1. filtrationfiltered over a plug of Celite
  2. customevacuated
  3. customto yield a brown oil
  4. additionwas added dropwise
  5. customto give a tan-brown slurry
  6. temperatureThis mixture was warmed to room temperature
  7. temperatureAfter cooling to 0° C. it
  8. customwas quenched with 150 mL of water, hexane (200 mL)
  9. additionadded
  10. customThe organic layer was separated
  11. extractionthe aqueous layer was extracted with two 50-mL portions of hexane
  12. washThe combined organic layers were washed with two 50-mL portions of brine
  13. dry with materialdried over anhydrous magnesium sulfate
  14. filtrationAfter filtration over Celite
  15. customthe solvent was removed under vacuo

출처 및 근거

ORD 기록
ord-2fe4da1b36814eb080cd3108fb95fc5e
출처 데이터셋
uspto-grants-2001_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06169151A

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트