Phenylphosphonic Acid → Zinc Oxide

참여 물질

반응 단계

An aqueous slurry of zinc oxide was prepared by charging a 300 mL reaction flask equipped with a stirrer with 10.0 g (123 mmol) of zinc oxide (JIS grade 2, available from HakusuiTech Ltd.) and 90.0 g of water. An aqueous solution of 19.4 g (123 mmol) of phenylphosphonic acid (Nissan Chemical Industries, Ltd.) dissolved in 110.0 g of water was gradually added dropwise at room temperature (about 25° C.) to this slurry with stirring, thereby effecting a reaction for five hours. The slurry was then filtered and the wet cake was thoroughly rinsed with water. The wet cake was subsequently dried at 120° C. for at least 12 hours, yielding a white powder of zinc phenylphosphonate. FIG. 2 shows a micrograph taken with a field-emission scanning electron microscope (SEM: JSM-7400F, manufactured by JEOL Ltd.) of the white powder of zinc phenylphosphonate thus obtained.

출처 및 근거