Chloropentafluorobenzene → Bis(pentafluorophenyl)diethoxysilane

HRID 584332

반응식

HRID 584332 반응식
Cl[C:2]1[C:7]([F:8])=[C:6]([F:9])[C:5]([F:10])=[C:4]([F:11])[C:3]=1[F:12].[Li]C(CC)C.[CH2:18]([O:20][Si:21]([O:34][CH2:35][CH3:36])(Cl)[C:22]1[C:27]([F:28])=[C:26]([F:29])[C:25]([F:30])=[C:24]([F:31])[C:23]=1[F:32])[CH3:19]>CCOCC>[F:8][C:7]1[C:2]([Si:21]([C:22]2[C:23]([F:32])=[C:24]([F:31])[C:25]([F:30])=[C:26]([F:29])[C:27]=2[F:28])([O:34][CH2:35][CH3:36])[O:20][CH2:18][CH3:19])=[C:3]([F:12])[C:4]([F:11])=[C:5]([F:10])[C:6]=1[F:9]

참가 물질

5

반응물 3

HCID 9579ChloropentafluorobenzeneHCID 21864267DiethoxychloropentafluorophenylsilaneHCID 178418400CID 53628100

생성물 1

HCID 11102434Bis(pentafluorophenyl)diethoxysilane

시약·촉매·용매 1

HCID 3283Diethyl Ether용매2회

반응 조건

온도
-70 °C

실험 절차

39.52 g (0.195 mol) chloropentafluorobenzene is weighed to a 1000 mL vessel and 250 mL Et2O is added. The vessel is cooled down to −70° C. and 150 mL (0.195 mol) of sec-BuLi (1.3 M) is added dropwise during one hour. The temperature of the solution is kept below −50° C. all the time. The solution is stirred for 30 minutes and 62.54 g (0.195 mol) of diethoxychloropentafluorophenylsilane in Et2O (100 mL) is added in small portions. The solution is stirred for over night allowing it to warm up to room temperature. Formed clear solution is filtered and evaporated to dryness to result di(pentafluorophenyl)diethoxysilane, (C6F5)2Si(OEt)2.

후처리

  1. customis kept below −50° C.
  2. stirringThe solution is stirred for over night
  3. temperatureto warm up to room temperature
  4. customFormed clear solution
  5. filtrationis filtered
  6. customevaporated to dryness

출처 및 근거

ORD 기록
ord-4ccf33376791465fa6f7a134a766573e
출처 데이터셋
uspto-grants-2005_08
특허 번호
US06924384B2

연결된 노트

불러오는 중…