홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

(-)-Benzyl (R)-glycidyl ether → (2R)-1-(benzyloxy)pent-4-en-2-ol

HRID 590590
인쇄

반응식

HRID 590590 반응식
[CH2:1]([O:8][CH2:9][C@H:10]1[CH2:12][O:11]1)[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.[CH:13]([Mg]Br)=[CH2:14]>O1CCCC1.[Cu]I>[CH2:1]([O:8][CH2:9][C@H:10]([OH:11])[CH2:12][CH:13]=[CH2:14])[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 159746(-)-Benzyl (R)-glycidyl etherHCID 178418507HCID 178418507, 화합물

생성물 1

HCID 10375318(2R)-1-(benzyloxy)pent-4-en-2-ol

시약·촉매·용매 2

HCID 24350Copper(1+) iodide; Copper(I) iodide; Cuprous iodide; Cuprous iodide (CuI)촉매HCID 8028Tetrahydrofuran용매

반응 조건

온도
-78 °C

실험 절차

To a solution of (2R)-2-[(benzyloxy)methyl]oxirane (167 g, 1.02 mol) in tetrahydrofuran (2 L) was added copper(I) iodide (11.62 g, 61.02 mmol) at room temperature. The mixture was stirred for 5 minutes, then cooled to −78° C. A solution of vinylmagnesium bromide (1 M in tetrahydrofuran, 1.12 L, 1.12 mol) was added drop-wise over 1 hour while the reaction temperature was maintained below −70° C. Upon completion of the addition, the cooling bath was removed and the reaction mixture was left to stir at room temperature for 1 hour, then quenched by slow addition of aqueous ammonium chloride solution (200 mL). After dilution with aqueous ammonium chloride solution (1.5 L) and ethyl acetate (1.5 L), the aqueous layer was extracted with ethyl acetate (1 L) and the combined organic layers were washed with aqueous ammonium chloride solution (1.5 L), dried over magnesium sulfate, filtered, and concentrated in vacuo. Three batches of this reaction were carried out and combined to give the product as an orange oil. Yield: 600 g, 3.1 mol, quantitative. 1H NMR (400 MHz, CDCl3) δ 7.28-7.40 (m, 5H), 5.78-5.90 (m, 1H), 5.08-5.17 (m, 2H), 4.57 (s, 2H), 3.86-3.94 (m, 1H), 3.53 (dd, J=9.6, 3.3 Hz, 1H), 3.39 (dd, J=9.6, 7.4 Hz, 1H), 2.26-2.34 (m, 3H).

후처리

  1. temperaturewas maintained below −70° C
  2. additionUpon completion of the addition
  3. customthe cooling bath was removed
  4. waitthe reaction mixture was left
  5. stirringto stir at room temperature for 1 hour
  6. customquenched by slow addition of aqueous ammonium chloride solution (200 mL)
  7. extractionAfter dilution with aqueous ammonium chloride solution (1.5 L) and ethyl acetate (1.5 L), the aqueous layer was extracted with ethyl acetate (1 L)
  8. washthe combined organic layers were washed with aqueous ammonium chloride solution (1.5 L)
  9. dry with materialdried over magnesium sulfate
  10. filtrationfiltered
  11. concentrationconcentrated in vacuo

출처 및 근거

ORD 기록
ord-bf7e12b0237f46c0ac79a50af0fe7bdf
출처 데이터셋
uspto-grants-2016_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09233981B1

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트