홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Toluene → 5-(Pyrazin-2-yl)pyridin-2-amine

HRID 592149
인쇄

반응식

HRID 592149 반응식
CC1(C)C(C)(C)OB([C:9]2[CH:10]=[CH:11][C:12]([NH2:15])=[N:13][CH:14]=2)O1.I[C:18]1[CH:23]=[N:22][CH:21]=[CH:20][N:19]=1.C1(C)C=CC=CC=1.C([O-])([O-])=O.[Na+].[Na+]>C1C=CC([P]([Pd]([P](C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)([P](C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)[P](C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)=CC=1.C(O)C>[N:19]1[CH:20]=[CH:21][N:22]=[CH:23][C:18]=1[C:9]1[CH:10]=[CH:11][C:12]([NH2:15])=[N:13][CH:14]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 1140TolueneHCID 10340Sodium CarbonateHCID 642841IodopyrazineHCID 27565555-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)pyridin-2-amine

생성물 1

HCID 592592255-(Pyrazin-2-yl)pyridin-2-amine

시약·촉매·용매 2

HCID 178418397
HCID 178418397, 화합물
촉매
HCID 702Ethanol용매

반응 조건

온도
90 °C

실험 절차

To a sealed tube was added 5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyridin-2-amine 86-1 (2.2 g, 10 mmol), 2-iodopyrazine 86-2 (2.06 g, 10 mmol), Pd(PPh3)4 (577 mg, 0.5 mmol), toluene (70 mL), ethanol (15 mL) and 2M Na2CO3 (15 mL). The reaction mixture was bubbled with nitrogen for 2 minutes and stirred at 90° C. for 10 hours. After cooling to room temperature, the solvents were evaporated and the residue was redissolved in dichloromethane (200 ml) and treated with 1M HCl aqueous solution (50 mL). The two layers were separated and the aqueous layer was treated with 10% NaOH aqueous solution to adjust the pH to around 13. The resulting suspension was extracted with ethyl acetate (100 mL×3). The combined organic phases were washed with H2O (50 mL) and brine (50 mL), dried over Na2SO4, and concentrated to give 5-(pyrazin-2-yl)pyridin-2-amine 86-3 as white solid. MS m/z 173.1 (M+1); 1H NMR 400 MHz (DMSO-d6) δ 9.12(d, 1H, J=1.6 Hz), 8.73(m, 1H), 8.60(m, 1H), 8.46(d, 1H, J=2.8 Hz), 8.12(dd, 1H, J1=8.8 Hz, J2=2.4 Hz), 6.55(d, 1H, J=8.8 Hz), 6.46(s, 2H).

후처리

  1. customThe reaction mixture was bubbled with nitrogen for 2 minutes
  2. temperatureAfter cooling to room temperature
  3. customthe solvents were evaporated
  4. dissolutionthe residue was redissolved in dichloromethane (200 ml)
  5. additiontreated with 1M HCl aqueous solution (50 mL)
  6. customThe two layers were separated
  7. additionthe aqueous layer was treated with 10% NaOH aqueous solution
  8. extractionThe resulting suspension was extracted with ethyl acetate (100 mL×3)
  9. washThe combined organic phases were washed with H2O (50 mL) and brine (50 mL)
  10. dry with materialdried over Na2SO4
  11. concentrationconcentrated

출처 및 근거

ORD 기록
ord-e0a48ecec504447c947630af26796a41
출처 데이터셋
uspto-grants-2016_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09238646B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트