홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Water → HCID 178506641, 화합물

HRID 610397
노트
인쇄 미리보기

반응식

HRID 610397 반응식
[S:1]1[CH:5]=[CH:4][C:3]2[CH:6]=[CH:7][CH:8]=[CH:9][C:2]1=2.[Li:10]CCCC.ClB(Cl)C1CCCC1.O>CCOCC>[S:1]1[C:5]([Li:10])=[CH:4][C:3]2[CH:6]=[CH:7][CH:8]=[CH:9][C:2]1=2
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 962WaterHCID 7221Benzo(B)ThiopheneHCID 5326172Borane, dichlorocyclopentyl-HCID 178418339Butyllithium

생성물 1

HCID 178506641HCID 178506641, 화합물

시약·촉매·용매 1

HCID 3283Diethyl Ether용매

반응 조건

온도
-90 °C

실험 절차

A dry 100 mL round-bottomed flask equipped with a mechanical stirrer, a reflux condenser, a low temperature thermometer and a silicone rubber septum was flushed with argon. 2-benzo[B]thienyllithium was prepared in situ from 1.1 g of benzo[B]thiophene (8.21 mmol) and 3.3 mL of 2.5 m solution of n-BuLi (in hexanes) in 20 mL of ether. The mixture was cooled to -90° C. and the solution of dichlorocyclopentylborane obtained in step 1 was added over 10 min while stirring was maintained. The mixture was brought to 20° C. and stirred for 2 h at this temperature. Distilled water (20 mL) was added with vigorous stirring. The top layer formed was separated and discarded. The aqueous layer was poured into 30 mL of saturated solution of NME4CL and shaken. The precipitate formed was filtered, washed with 60 ml of distilled water, and recrystallized from acetone/methanol=3/2 yielding 1.2 g (79%) of white crystalline solid. m.p. 234-236° C. 1H NMR (D6 -DMSO, 200 MHz) δ 7.69 (d, J=7.6 Hz, 3H), 7.57 (d, J=7.6 Hz, 3H), 7.14 (t, J=7.4 Hz, 3H), 7.07 (s, 3H), 7.04 (t, J=7.4 Hz, 3H), 3.04 (s, 12H), 1.85 (m, 2H), 1.65 (m, 1H), 1.37 (br s, 6H). 13C NMR (D6 -DMSO, 50 MHz) δ 141.9, 124.1, 122.5, 121.4, 120.9, 54.51 (t, J=4 HZ), 31.38, 27.34. 11B NMR (DMSO, 128 MHz) δ -30.36. Anal. Calcd. for C33H36BNS3 : C, 71.59; H, 6.55; N, 2.53; S, 17.37. Found: C, 71.50; H, 6.63; N, 2.53; S, 17.30.

후처리

  1. customA dry 100 mL round-bottomed flask equipped with a mechanical stirrer, a reflux condenser
  2. customa low temperature thermometer and a silicone rubber septum was flushed with argon
  3. temperaturewas maintained
  4. customwas brought to 20° C.
  5. stirringstirred for 2 h at this temperature
  6. customThe top layer formed
  7. customwas separated
  8. additionThe aqueous layer was poured into 30 mL of saturated solution of NME4CL
  9. stirringshaken
  10. customThe precipitate formed
  11. filtrationwas filtered
  12. washwashed with 60 ml of distilled water
  13. customrecrystallized from acetone/methanol=3/2 yielding 1.2 g (79%) of white crystalline solid

출처 및 근거

ORD 기록
ord-edbe34f5131a4ce991a565184b2bbd84
출처 데이터셋
uspto-grants-1999_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05998496

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트