홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Ammonia → Tazofelone

HRID 612993
인쇄

반응식

HRID 612993 반응식
[CH3:1][C:2]([C:5]1[CH:6]=[C:7](C2SC(=S)N(C)C2=O)[CH:8]=[C:9]([C:12]([CH3:15])([CH3:14])[CH3:13])[C:10]=1[OH:11])([CH3:4])[CH3:3].N.C=O.[S:27]1[CH:31]=C[CH:29]=[C:28]1[C:32]([NH2:34])=[O:33]>C(O)(=O)C.O.CO>[CH3:14][C:12]([C:9]1[CH:8]=[C:7]([CH2:29][CH:28]2[S:27][CH2:31][NH:34][C:32]2=[O:33])[CH:6]=[C:5]([C:2]([CH3:3])([CH3:4])[CH3:1])[C:10]=1[OH:11])([CH3:15])[CH3:13]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 222AmmoniaHCID 712FormaldehydeHCID 220632-ThiophenecarboxamideHCID 212520205-{[3,5-Bis(1,1-dimethylethyl)-4-hydroxyphenyl]}-methyl-2-thioxo-4-thiazolidinone

생성물 1

HCID 68745Tazofelone수율 70%

시약·촉매·용매 3

HCID 176Acetic Acid
용매
HCID 887Methanol용매
HCID 962Water용매

반응 조건

온도
0 °C

실험 절차

To 3.22 g (9.2 mmol) of 5-{[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]}-methyl-2-thioxo-4-thiazolidinone, in a 25 mL pressure tube equipped with magnetic stir bar, 13 mL of methanol was added. The resulting reaction mixture was cooled to 0° C. and ammonia gas (1.6 g, 91 mmol) was slowly added. Formalin (0.76 mL, 0.8 g, 10 mmol) was then added. The pressure tube was sealed and heated to 80° C. for approximately 17 hours with stirring. Reaction was deemed complete when the amount of thiolamide was below 4%, as determined by HPLC. Deionized water (12 mL) was then added in a drop-wise manner, followed by acetic acid (6 mL). After 30 min, the reaction mixture was cooled to 0° C. for 1 hour. The reaction mixture was filtered and the resulting crystalline product was dissolved in ethyl acetate (5 vol). Dissolution was facilitated by heating to 66° C. The resulting solution was filtered and seeded with a small amount of 5-[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]methyl-4-thiazolidinone as the solution was slowly cooled to ambient temperature. Crystallization ensued and the resultant slurry was stirred for approximately 4 hours. The slurry was concentrated under reduced pressure (1 vol ethyl acetate) and stirred for an additional 16 hours. The slurry was filtered and the wet cake was washed with water (2×10 mL) and 1/4 ethyl acetate/hexane (2×10 mL). The product was dried in an oven at 50° C. to obtain 2.07 g (70% yield) of title compound.

후처리

  1. customThe resulting reaction mixture
  2. customThe pressure tube was sealed
  3. temperatureheated to 80° C. for approximately 17 hours
  4. customReaction
  5. temperaturethe reaction mixture was cooled to 0° C. for 1 hour
  6. filtrationThe reaction mixture was filtered
  7. dissolutionthe resulting crystalline product was dissolved in ethyl acetate (5 vol)
  8. dissolutionDissolution
  9. temperatureby heating to 66° C
  10. filtrationThe resulting solution was filtered
  11. temperaturewas slowly cooled to ambient temperature
  12. customCrystallization
  13. stirringthe resultant slurry was stirred for approximately 4 hours
  14. concentrationThe slurry was concentrated under reduced pressure (1 vol ethyl acetate)
  15. stirringstirred for an additional 16 hours
  16. filtrationThe slurry was filtered
  17. washthe wet cake was washed with water (2×10 mL) and 1/4 ethyl acetate/hexane (2×10 mL)
  18. customThe product was dried in an oven at 50° C.

출처 및 근거

ORD 기록
ord-923d112a22f7449c867082b3773ffdc8
출처 데이터셋
uspto-grants-1999_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06005142

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트