홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Butyl bromide → Tri-n-octyl-n-butylphosphonium bromide

HRID 614579
인쇄

반응식

HRID 614579 반응식
[CH2:1]([P:9]([CH2:18][CH2:19][CH2:20][CH2:21][CH2:22][CH2:23][CH2:24][CH3:25])[CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH2:15][CH2:16][CH3:17])[CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH3:8].[Br:26][CH2:27][CH2:28][CH2:29][CH3:30]>>[Br-:26].[CH2:18]([P+:9]([CH2:1][CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH3:8])([CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH2:15][CH2:16][CH3:17])[CH2:27][CH2:28][CH2:29][CH3:30])[CH2:19][CH2:20][CH2:21][CH2:22][CH2:23][CH2:24][CH3:25]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 2

HCID 8002Butyl bromideHCID 20851Trioctylphosphine

생성물 1

HCID 22731140Tri-n-octyl-n-butylphosphonium bromide

실험 절차

Tri-n-octyl-n-butylphosphonium bromide is prepared by slowly dripping tri-(n-octyl)phosphine (740 grams) into refluxing 1-bromobutane (500 grams) in a nitrogen atmosphere. Reflux is continued one hour after final addition then the solution is cooled with stirring for about 18 hours, followed by vacuum removal of excess 1-bromobutane at 60° C. This product, 1210 grams from two successive preparations, is added to 880 grams of sodium 3,5-dicarbomethoxybenzenesulfonate in 2500 milliliters of water and stirred for at least 1 hour at 85° C. then the heat is removed and the oil in water mixture is allowed to stir and cool for about 18 hours. The oil layer is separated from the water, rinsed with 1000 milliliters of water and dried at about 80° C. at a pressure less than 2 torr for 18 hours. This product, an oil, is tri-n-octyl-n-butylphosphonium 3,5-dicarbomethoxybenzenesulfonate with 4.2% phosphorous and 4.7% sulfur by analysis.

후처리

  1. temperatureReflux
  2. additionafter final addition
  3. temperaturethe solution is cooled
  4. customfollowed by vacuum removal of excess 1-bromobutane at 60° C
  5. additionThis product, 1210 grams from two successive preparations, is added to 880 grams of sodium 3,5-dicarbomethoxybenzenesulfonate in 2500 milliliters of water
  6. stirringstirred for at least 1 hour at 85° C.
  7. customthe heat is removed
  8. stirringto stir
  9. temperaturecool for about 18 hours
  10. customThe oil layer is separated from the water
  11. washrinsed with 1000 milliliters of water
  12. customdried at about 80° C. at a pressure less than 2 torr for 18 hours

출처 및 근거

ORD 기록
ord-f8457854e68845988c030212b48859ea
출처 데이터셋
uspto-grants-1979_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04145473

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트