HCID 178451930, 화합물 → HCID 178451931, 화합물
반응식
[C:1]([O:5][C:6]([N:8]1[CH2:12][CH2:11][CH2:10][C@H:9]1[C:13]1[NH:14][C:15]([C:18]2[CH:19]=[C:20]3[C:25](=[CH:26][CH:27]=2)[CH:24]=[C:23]([C:28]2[CH:29]=[C:30]4[C:50](=[CH:51][CH:52]=2)[C:34]2[NH:35][C:36]([C@@H:38]5[CH2:42][CH2:41][CH2:40][N:39]5[C:43]([O:45][C:46]([CH3:49])([CH3:48])[CH3:47])=[O:44])=[N:37][C:33]=2[CH2:32][CH2:31]4)[CH:22]=[CH:21]3)=[CH:16][N:17]=1)=[O:7])([CH3:4])([CH3:3])[CH3:2]>C(Cl)Cl.[O-2].[Mn+4].[O-2]>[C:1]([O:5][C:6]([N:8]1[CH2:12][CH2:11][CH2:10][C@H:9]1[C:13]1[NH:14][C:15]([C:18]2[CH:19]=[C:20]3[C:25](=[CH:26][CH:27]=2)[CH:24]=[C:23]([C:28]2[CH:29]=[C:30]4[C:50](=[CH:51][CH:52]=2)[C:34]2[NH:35][C:36]([C@@H:38]5[CH2:42][CH2:41][CH2:40][N:39]5[C:43]([O:45][C:46]([CH3:49])([CH3:48])[CH3:47])=[O:44])=[N:37][C:33]=2[CH:32]=[CH:31]4)[CH:22]=[CH:21]3)=[CH:16][N:17]=1)=[O:7])([CH3:4])([CH3:2])[CH3:3]참가 물질
4
실험 절차
Manganese(IV) oxide (1.53 g, 17.6 mmol) was added to a solution of (S)-tert-butyl 2-(7-(6-(2-((S)-1-(tert-butoxycarbonyl)pyrrolidin-2-yl)-1H-imidazol-5-yl)naphthalen-2-yl)-4,5-dihydro-1H-naphtho[1,2-d]imidazol-2-yl)pyrrolidine-1-carboxylate (183 mg, 0.196 mmol) in DCM (5 mL) and the mixture was stirred overnight at room temperature. The reaction mixture was filtered through a pad of diatomaceous earth (CELITE®) and washed with a solution of methanol/DCM 1:1. The volatiles were removed under vacuum using a rotavap to afford (S)-tert-butyl 2-(7-(6-(2-((S)-1-(tert-butoxycarbonyl)pyrrolidin-2-yl)-1H-imidazol-5-yl)naphthalen-2-yl)-1H-naphtho[1,2-d]imidazol-2-yl)pyrrolidine-1-carboxylate (163 mg) as tan solid. LC-MS retention time 1.523 min; m/z 699.53 (MH+). LC data was recorded on a Shimadzu LC-10AS liquid chromatograph equipped with a Waters Sunfire 5u C18 4.6×30 mm column using a SPD-10AV UV-Vis detector at a detector wave length of 220 nM. The elution conditions employed a flow rate of 4 mL/min, a gradient of 100% Solvent A/0% Solvent B to 0% Solvent A/100% Solvent B, a gradient time of 2 min, a hold time of 1 min, and an analysis time of 3 min where Solvent A was 10% MeOH/90% H2O/0.1% TFA and Solvent B was 10% H2O/90% MeOH/0.1% TFA. MS data was determined using a MICROMASS® Platform for LC in electrospray mode.