홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acetic Acid → 3-(Cyclopropylmethoxy)-4-(difluoromethoxy)benzoic Acid

HRID 631781
인쇄

반응식

HRID 631781 반응식
[CH:1]1([CH2:4][O:5][C:6]2[CH:7]=[C:8]([CH:11]=[CH:12][C:13]=2[O:14][CH:15]([F:17])[F:16])[CH:9]=[O:10])[CH2:3][CH2:2]1.C(O)(=[O:20])C.S(=O)(=O)(O)N.[Cl-].[Na+]>O>[CH:1]1([CH2:4][O:5][C:6]2[CH:7]=[C:8]([CH:11]=[CH:12][C:13]=2[O:14][CH:15]([F:16])[F:17])[C:9]([OH:20])=[O:10])[CH2:3][CH2:2]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 176Acetic AcidHCID 5234Sodium ChlorideHCID 5987Sulfamic AcidHCID 189736983-(Cyclopropylmethoxy)-4-(difluoromethoxy)benzaldehyde

생성물 1

HCID 23940063-(Cyclopropylmethoxy)-4-(difluoromethoxy)benzoic Acid수율 85%

시약·촉매·용매 1

HCID 962
Water
용매
2회

반응 조건

온도
7.5 °C

실험 절차

40 g of 3-(cyclopropylmethoxy)-4-(difluoromethoxy)-benzaldehyde 160 mL of glacial acetic acid and 32.0 g of sulphamic acid (2.0 eq) were loaded in a reactor. The mixture was cooled at 5-10° C. and the temperature was not allowed to exceed 20° C., adding slowly a previously prepared solution of 44.77 g of sodium chloride and 61 mL of deionised water. After the addition, the reaction was kept for 1 hour at 15-20° C. 450 mL of deionised water was loaded and then it was cooled at 0-5° C. and kept for 1 h at this temperature. The solid was filtered and washed four times with 200 mL of deionised water. The product was dried for 15 h at 40° C., obtaining 36 g (yield 85%) of 3-(cyclopropylmethoxy)-4-(difluoromethoxy)-benzoic acid (II) as solid.

후처리

  1. customto exceed 20° C.
  2. additionAfter the addition
  3. temperatureit was cooled at 0-5° C.
  4. waitkept for 1 h at this temperature
  5. filtrationThe solid was filtered
  6. washwashed four times with 200 mL of deionised water
  7. customThe product was dried for 15 h at 40° C.

출처 및 근거

ORD 기록
ord-137d8b51a49d4c059e07ba72f7b8b027
출처 데이터셋
uspto-grants-2016_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09321726B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트