홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Chlorotrimethylsilane → 2-Chloro-5-(3-trimethylsilanyloxycyclopent-2-enyl)pyridine

HRID 646634
인쇄

반응식

HRID 646634 반응식
[Cl-].[Li+].[Cl:3][C:4]1[CH:9]=[CH:8][C:7](I)=[CH:6][N:5]=1.[CH3:11][Si:12](Cl)([CH3:14])[CH3:13].[C:16]1(=[O:21])[CH2:20][CH2:19][CH:18]=[CH:17]1>C1COCC1.[NH4+].[Cl-].CCOC(C)=O.[Cu]I>[Cl:3][C:4]1[CH:9]=[CH:8][C:7]([CH:18]2[CH2:19][CH2:20][C:16]([O:21][Si:12]([CH3:14])([CH3:13])[CH3:11])=[CH:17]2)=[CH:6][N:5]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 6397ChlorotrimethylsilaneHCID 135882-Cyclopenten-1-oneHCID 433294Lithium ChlorideHCID 43971762-Chloro-5-iodopyridine

생성물 1

HCID 592659422-Chloro-5-(3-trimethylsilanyloxycyclopent-2-enyl)pyridine수율 18%

시약·촉매·용매 3

HCID 24350
Copper(1+) iodide; Copper(I) iodide; Cuprous iodide; Cuprous iodide (CuI)
촉매
HCID 8028Tetrahydrofuran용매2회
HCID 86583716Ammonium chloride ethyl acetate용매

반응 조건

온도
-40 °C

실험 절차

Lithium chloride (0.11 g, 2.5 mmol) was weighed into an oven-dried, nitrogen-swept 50 mL 3-necked flask and the flask placed under vacuum and heated with a heat gun, cooled and back filled with nitrogen. Copper(I) iodide (0.24 g, 1.3 mmol) and THF (5 mL) were added and the mixture stirred to give homogenous yellow solution. 2-Chloro-5-iodopyridine (3.1 g, 13.1 mmol) was dissolved in THF (25 mL) in an oven dried, nitrogen-swept 100 mL 3-necked flask and the solution cooled to −40° C. under nitrogen and treated with i-PrMgCl (1.4 g, 13.7 mmol, 6.9 mL of a 2 M solution in THF) keeping the internal temperature below −35° C. The flask containing the solubilized copper iodide was treated with trimethylsilyl chloride (1.4 g, 12.4 mmol) and cyclopentenone (1.0 g, 12.4 mmol, filtered through alumina) and cooled to −40° C. and added drop wise, via cannula, to the slurry of the Grignard reagent keeping the internal temperature below −35° C. The mixture was allowed to warm to room temperature over 2 h then diluted with saturated (sat.) NH4Cl/EtOAc and the layers separated, the organic layer dried (Na2SO4), filtered, concentrated and purified by flash silica gel chromatography (hexanes: EtOAc/25:1→2:1) to give 2-chloro-5-(3-trimethylsilanyloxycyclopent-2-enyl)pyridine (0.58 g, 18%) as an oil. 1H NMR (300 MHz, CDCl3) δ 8.22 (d, 1H, J=2.4 Hz), 7.48 (dd, 1H, J=8.1, 2.4 Hz), 7.23 (d, 1H, J=8.1 Hz), 4.66 (m, 1H), 3.87 (m, 1H), 2.39 (m, 3H), 1.63 (m, 1H), 0.25 (s, 9H). The bulk of the material isolated from this reaction was 2-chloropyridine.

후처리

  1. temperatureheated with a heat gun
  2. temperaturecooled
  3. additionback filled with nitrogen
  4. customto give homogenous yellow solution
  5. customdried
  6. additiontreated with i-PrMgCl (1.4 g, 13.7 mmol, 6.9 mL of a 2 M solution in THF)
  7. customthe internal temperature below −35° C
  8. additionThe flask containing the solubilized copper iodide
  9. temperaturecooled to −40° C.
  10. additionadded drop wise
  11. customthe internal temperature below −35° C
  12. temperatureto warm to room temperature over 2 h
  13. customthe layers separated
  14. dry with materialthe organic layer dried (Na2SO4)
  15. filtrationfiltered
  16. concentrationconcentrated
  17. custompurified by flash silica gel chromatography (hexanes: EtOAc/25:1→2:1)

출처 및 근거

ORD 기록
ord-2d46127dab64434b971144c103376821
출처 데이터셋
uspto-grants-2010_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07705156B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트