홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Diethyl Ether → HCID 178494494, 화합물

HRID 649045
인쇄

반응식

HRID 649045 반응식
[C-:1]#[O+:2].[C-:3]#[O+:4].[C-:5]#[O+:6].[C-:7]#[O+:8].[C-:9]#[O+:10].[C-]#[O+].[Cr:13].[C:14]1([Li])[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1.C[CH2:22][O:23][CH2:24]C>>[C:1](=[Cr:13](=[C:9]=[O:10])(=[C:7]=[O:8])(=[C:5]=[O:6])(=[C:3]=[O:4])=[C:22]([C:14]1[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1)[O:23][CH3:24])=[O:2]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 3

HCID 3283Diethyl EtherHCID 25589Chromium hexacarbonylHCID 178506676HCID 178506676, 화합물

생성물 1

HCID 178494494HCID 178494494, 화합물수율 80.5%

실험 절차

To a suspension of 22 g (0.1 mole) of chromium hexacarbonyl in ether is slowly added phenyllithium (51 ml, 0.1 mole, cyclohexane:ether solution) via syringe over a period of 15-20 minutes under argon at room temperature, and the resulting deep red solution is stirred at room temperature for 1 hour. The solvent is removed under reduced pressure (bath temperature should be below 40° C.), and the black residue is dissolved in 200 ml water. (CH3)3O.BF4 (about 15 g) is added portionwise to the solution until it becomes slightly acidic (pH≈5.5). The aqueous layer is extracted three times with 200 ml of ether, and the combined etheral extracts are washed once with 300 ml of saturated brine solution, once with 300 ml of saturated sodium carbonate solution, and three times with 300 ml of saturated brine solution, dried over anhydrous sodium sulfate and filtered. The solvent is removed using a rotary evaporator and the deep red tarry residue is purified by a silica gel column (200 g) using flash chromatography. Elution by approx. 10% ether in n-hexane gives a deep red syrup, which is solidified upon cooling. Recrystallization from pet-ether at -70° C. gives 25.12 g (80.5%) of pentacarbonyl[phenyl(methoxy)carbene]chromium as deep red crystalline.

후처리

  1. customof 15-20 minutes
  2. customat room temperature
  3. customThe solvent is removed under reduced pressure (bath temperature should be below 40° C.)
  4. dissolutionthe black residue is dissolved in 200 ml water
  5. additionBF4 (about 15 g) is added portionwise to the solution until it
  6. extractionThe aqueous layer is extracted three times with 200 ml of ether
  7. washthe combined etheral extracts are washed once with 300 ml of saturated brine solution, once with 300 ml of saturated sodium carbonate solution, and three times with 300 ml of saturated brine solution
  8. dry with materialdried over anhydrous sodium sulfate
  9. filtrationfiltered
  10. customThe solvent is removed
  11. customa rotary evaporator
  12. customthe deep red tarry residue is purified by a silica gel column (200 g)
  13. washElution by approx. 10% ether in n-hexane
  14. customgives a deep red syrup, which
  15. temperatureupon cooling
  16. customRecrystallization from pet-ether at -70° C.

출처 및 근거

ORD 기록
ord-20b9fa8470a742b68ab05636be8b6fa3
출처 데이터셋
uspto-grants-1988_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04737519

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트