홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1H-Benzimidazole, 5,6-dichloro-1-ethyl-2-methyl- → HCID 178462747, 화합물

HRID 649493
인쇄

반응식

HRID 649493 반응식
[Cl:1][C:2]1[C:13]([Cl:14])=[CH:12][C:5]2[N:6]([CH2:10][CH3:11])[C:7]([CH3:9])=[N:8][C:4]=2[CH:3]=1.Cl[CH2:16][CH2:17][NH:18][S:19]([CH3:22])(=[O:21])=[O:20]>C1(OC)C=CC=CC=1>[Cl-:1].[Cl:1][C:2]1[C:13]([Cl:14])=[CH:12][C:5]2[N+:6]([CH2:10][CH3:11])=[C:7]([CH3:9])[N:8]([CH2:16][CH2:17][NH:18][S:19]([CH3:22])(=[O:21])=[O:20])[C:4]=2[CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 767171H-Benzimidazole, 5,6-dichloro-1-ethyl-2-methyl-HCID 89092N-(2-Chloroethyl)methanesulphonamide

생성물 1

HCID 178462747HCID 178462747, 화합물

시약·촉매·용매 1

HCID 7519Anisole용매

반응 조건

온도
150 °C

실험 절차

22.9 g (0.1 mol) of 5,6-dichloro-1-ethyl-2-methylbenzoimidazole and 23.6 g (0.15 mol) of N-(2-chloroethyl)methanesulfonamide were put into a 200-ml three-necked flask equipped with a stirrer and heated with stirring for 2 hours on an oil bath which had been heated to a temperature of 150° C. Then, 20 ml of anisole was added to the mixture. The mixture was then allowed to cool to room temperature with stirring. The resulting crystals were filtered off, washed with acetone and isopropanol, and dried.

후처리

  1. customequipped with a stirrer
  2. temperatureheated
  3. temperatureto cool to room temperature
  4. stirringwith stirring
  5. filtrationThe resulting crystals were filtered off
  6. washwashed with acetone and isopropanol
  7. customdried

출처 및 근거

ORD 기록
ord-a56c3e55fb414f519a9b494eeb94be17
출처 데이터셋
uspto-grants-1988_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04740455

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트