홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Chlorotrimethylsilane → 5-(Trimethylsilyl)furan-3-carbaldehyde

HRID 654891
노트
인쇄 미리보기

반응식

HRID 654891 반응식
C([Li])CCC.N1CCOCC1.Br[C:13]1[O:17][CH:16]=[C:15]([CH:18]=[O:19])[CH:14]=1.Cl[Si:21]([CH3:24])([CH3:23])[CH3:22]>CCCCCC.O1CCCC1>[CH3:22][Si:21]([CH3:24])([CH3:23])[C:13]1[O:17][CH:16]=[C:15]([CH:18]=[O:19])[CH:14]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 6397ChlorotrimethylsilaneHCID 8083MorpholineHCID 150370565-Bromofuran-3-carbaldehydeHCID 178418339Butyllithium2회

생성물 1

HCID 156632515-(Trimethylsilyl)furan-3-carbaldehyde

시약·촉매·용매 2

HCID 8028Tetrahydrofuran용매
HCID 8058
Hexane
용매
2회

실험 절차

n-Butyl lithium (a 1.6M solution in hexane, 31.0 ml, 49.7 mmol) was added dropwise to a solution of morpholine (4.33 ml, 49.7 mmol; freshly distilled from barium oxide) in tetrahydrofuran at -78° under argon. After 15 minutes, a solution of 5-bromo-3-furaldehyde (7.5 g, 49.7 mmol) in tetrahydrofuran was added dropwise. Stirring was continued for 30 min. and n-butyl lithium (a 1.6M solution in hexane; 46.6 ml, 74.5 mmol) was added dropwise. After 1 hour at -78°, chlorotrimethylsilane (18.9 ml, 149 mmol) was added and stirring continued while the cooling bath attained room temperature. The reaction mixture was quenched with 10% hydrochloric acid and the phases were separated. The aqueous phase was stirred, in the presence of ethyl ether (30 ml), with 10% hydrochloric acid at 0° C. for 1/2 hour. The organic phases were combined, washed (brine), dried (magnesium sulfate) and evaporated down. The residue was distilled under vacuum to give the title aldehyde as a colorless oil b.p. 48°-50°/0.25 torr.

후처리

  1. distillationfreshly distilled from barium oxide) in tetrahydrofuran at -78° under argon
  2. waitwas continued for 30 min.
  3. addition46.6 ml, 74.5 mmol) was added dropwise
  4. waitAfter 1 hour at -78°
  5. stirringstirring
  6. customcontinued while the cooling bath attained room temperature
  7. customThe reaction mixture was quenched with 10% hydrochloric acid
  8. customthe phases were separated
  9. stirringThe aqueous phase was stirred, in the presence of ethyl ether (30 ml), with 10% hydrochloric acid at 0° C. for 1/2 hour
  10. washwashed (brine)
  11. dry with materialdried (magnesium sulfate)
  12. customevaporated down
  13. distillationThe residue was distilled under vacuum

출처 및 근거

ORD 기록
ord-a240f97566774ee38119da325d24f463
출처 데이터셋
uspto-grants-1992_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05134128

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트