반응식
C=C.[CH2:3]=[CH:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH3:10].B([O-])([O-])[O-]>C[Ti]C>[CH2:3]=[CH2:4].[CH2:3]=[CH:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH3:10]참가 물질
5
반응 조건
- 온도
- 140 °C
실험 절차
Ethylene/1-Octene interpolymers were prepared using the general continuous solution procedure described above. Ethylene, 1-octene, and ISOPAR-E solvent were fed into the reactor at rates of about 4.50 lbs/hour, 0.70 lbs/hour, and 30.20 lbs/hour, respectively. The temperature was maintained at about 140° C., and saturated. Examples 3 and 4 were prepared by feeding Catalyst A and Catalyst B, Armeenium borate, and MMAO-3A to the reactor to produce a catalyst concentration of 2.36 ppm, a ratio of catalyst A to catalyst B of 0.44, 53.2 ppm of Armeenium borate, and 8.6 ppm of Al according to the general procedure. Other process parameters are also recorded in Table V.
후처리
- customExamples 3 and 4 were prepared
- customto produce a catalyst concentration of 2.36 ppm
출처 및 근거
- ORD 기록
- ord-14674231e99d4d85831a3fbb91e74efc
- 출처 데이터셋
- uspto-grants-2011_12
- 특허 번호
- USRE043004E1
연결된 노트
불러오는 중…