홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dodecasodium;tetraborate → Sodium Tetraborate

HRID 65546
인쇄

반응식

HRID 65546 반응식
[B:1]([O-:4])([O-:3])[O-:2].[B:5]([O-:8])([O-:7])[O-:6].[B:9]([O-:12])([O-])[O-].[B:13]([O-])([O-])[O-].[Na+:17].[Na+].[Na+].[Na+].[Na+].[Na+].[Na+].[Na+].[Na+].[Na+].[Na+].[Na+]>O>[B:1]1([O-:4])[O:3][B:13]2[O:12][B:9]([O:6][B:5]([O-:8])[O:7]2)[O:2]1.[Na+:17].[Na+:17]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 1

HCID 21225931Dodecasodium;tetraborate

생성물 1

HCID 10219853Sodium Tetraborate

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
1100 °C

실험 절차

Sodium tetraborate (Na2B4O7.10H2O), analyzed reagent was dried overnight at 150° C, mixed with the appropriate quantity of dopant ions and homogenized in an electric homogenizer (vibrator) during 10 minutes. The material was then transferred to a platinum crucible and heated at 1100° C for at least 30 minutes, until a clear transparent solution was obtained. The glass matrix loses water and the composition of the matrix is after the heating 35(Na2O).65(B2O3). A drop of the hot melt was allowed to fall directly onto a clean white glazed ceramic surface, into the center of a space ring of 1 mm thickness, and pressed with a second ceramic tile to produce a glass disk of 1 mm thickness and an approximate diameter of 12 mm. The glass is transparent in the ultraviolet and in the visible part of the spectrum.

후처리

  1. customwas dried overnight at 150° C
  2. additionmixed with the appropriate quantity of dopant ions
  3. customwas obtained
  4. customto produce a glass disk of 1 mm thickness

출처 및 근거

ORD 기록
ord-50d2ed7d23df46e19e1dda7dc1f6c787
출처 데이터셋
uspto-grants-1978_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04128411

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트