홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

1,4-Difluorobenzene → HCID 66849804, 화합물

HRID 658413
노트
인쇄 미리보기

반응식

HRID 658413 반응식
[F:1][C:2]1[CH:7]=[CH:6][C:5]([F:8])=[CH:4][CH:3]=1.N1([C:15](=[O:25])[C@@H:16]([O:18][CH:19]2[CH2:24][CH2:23][CH2:22][CH2:21][O:20]2)[CH3:17])CCOCC1.C(NC(C)C)(C)C.[Li]>C1COCC1.C1COCC1.CCCCCCC>[F:1][C:2]1[CH:7]=[CH:6][C:5]([F:8])=[CH:4][C:3]=1[C:15](=[O:25])[C@@H:16]([O:18][CH:19]1[CH2:24][CH2:23][CH2:22][CH2:21][O:20]1)[CH3:17]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 108921,4-DifluorobenzeneHCID 14978394HCID 14978394, 화합물HCID 45051747Lithium diisopropylamine

생성물 1

HCID 66849804HCID 66849804, 화합물수율 46.2%

시약·촉매·용매 2

HCID 8028Tetrahydrofuran용매HCID 21263495Tetrahydrofuran heptane
용매

반응 조건

온도
0 °C

실험 절차

1,4-Difluorobenzene (1.8 g; 15.8 mmol) and (2S)-1-Morpholin-4-yl-2-(tetrahydro-pyran-2-yloxy)-propan-1-one (3 g; 10.5 mmol) are dissolved in dry THF (15 ml). The mixture is cooled to 0° C. and then lithium diisopropylamine (7.9 ml of a 2M solution in THF/Heptane; 15.8 mmol) is added dropwise over a period of 20 minutes. The mixture is stirred for another 2 hours at 0° C. The reaction is then quenched with a saturated ammonium chloride solution. The reaction mixture is extracted with ethyl acetate. The organic phase is washed with water and brine and then dried over magnesium sulfate. The solids are filtered off and the solvent is removed under reduced pressure. The crude product is chromatographed over silicagel (eluent: Petrol ether/Ethyl acetate 50:1 to 30:1). 1.31 g of yellow crystalline material (yield 44.8%) is obtained with a HPLC purity of 96.2%. NMR: (CDCl3; 400 MHz): 7.53-7.47 (m; 1H); 7.24-7.16 (m; 1H); 7.15-7.07 (m; 1H); 5.10 (qd; J=7.2 Hz; 2.0 Hz; ½H); 4.85 (q; J=7.2 Hz; ½H); 4.74 (m; ½H); 4.64 (m; ½H); 3.89 (m; ½H); 3.71 (m; ½H); 3.51 (m; ½H); 3.34 (m; ½H); 1.90-1.48 (m; 6H); 1.47 (d; J=7.2 Hz; 1.5H); 1.42 (d; J=7.2 Hz; 1.5H).

후처리

  1. addition15.8 mmol) is added dropwise over a period of 20 minutes
  2. customThe reaction is then quenched with a saturated ammonium chloride solution
  3. extractionThe reaction mixture is extracted with ethyl acetate
  4. washThe organic phase is washed with water and brine
  5. dry with materialdried over magnesium sulfate
  6. filtrationThe solids are filtered off
  7. customthe solvent is removed under reduced pressure
  8. customThe crude product is chromatographed over silicagel (eluent: Petrol ether/Ethyl acetate 50:1 to 30:1)

출처 및 근거

ORD 기록
ord-0c7ca4f9daf64248bbab031567dabfad
출처 데이터셋
uspto-grants-2011_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08076494B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트