홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Tributyltin Chloride → tert-butyl N-(5-(tributylstannyl)-1,3-thiazol-2-yl)carbamate

HRID 661045
인쇄

반응식

HRID 661045 반응식
[S:1]1[CH:5]=[CH:4][N:3]=[C:2]1[NH:6][C:7](=[O:13])[O:8][C:9]([CH3:12])([CH3:11])[CH3:10].C([Li])CCC.[CH2:19]([Sn:23](Cl)([CH2:28][CH2:29][CH2:30][CH3:31])[CH2:24][CH2:25][CH2:26][CH3:27])[CH2:20][CH2:21][CH3:22]>C1COCC1>[CH2:28]([Sn:23]([CH2:19][CH2:20][CH2:21][CH3:22])([CH2:24][CH2:25][CH2:26][CH3:27])[C:5]1[S:1][C:2]([NH:6][C:7](=[O:13])[O:8][C:9]([CH3:10])([CH3:12])[CH3:11])=[N:3][CH:4]=1)[CH2:29][CH2:30][CH3:31]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 15096Tributyltin ChlorideHCID 11858898tert-butyl N-(1,3-thiazol-2-yl)carbamateHCID 178418339Butyllithium

생성물 1

HCID 2763269tert-butyl N-(5-(tributylstannyl)-1,3-thiazol-2-yl)carbamate수율 81.7%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매

반응 조건

온도
-78 °C

실험 절차

A solution of tert-butyl thiazol-2-ylcarbamate (15.0 g, 75 mmol), in THF (200 mL) was stirred at −78° C. and then n-butyl lithium (63 mL, 157 mmol) was added dropwise over 15 minutes. The resulting solution was stirred at −78° C. for 30 minutes, and then tributyltin chloride (22 mL, 82 mmol) was then added dropwise. The resulting pale yellow mixture was stirred for 30 minutes at −78° C. The bath was then removed, and the mixture was allowed to warm to room temperature. The reaction was then stirred for 2.5 hours. The reaction mixture was quenched with a saturated NH4Cl solution (300 mL). The layers were separated, and the aqueous layer was extracted with ether (3×100 mL). The organic layers were combined, washed with brine (300 mL), dried over MgSO4, filtered, and concentrated. The crude product was adsorbed onto a plug of silica gel and chromatographed through a Redi-Sep pre-packed silica gel column (330 g), eluting with a gradient of 10% to 20% EtOAc in hexanes, to provide the title compound (30 g, 81%) LCMS (M+H+) 490.1 calc. for C20H38N2O2SSn 490.1; 1H NMR (400 MHz, CDCl3) δ ppm 7.31 (s, 1H), 1.59 (s, 9H), 1.30 (tt, 6H), 1.54 (t, 6H), 1.10 (qt, 6H), 0.80 (t, 9H).

후처리

  1. stirringThe resulting pale yellow mixture was stirred for 30 minutes at −78° C
  2. customThe bath was then removed
  3. temperatureto warm to room temperature
  4. stirringThe reaction was then stirred for 2.5 hours
  5. customThe reaction mixture was quenched with a saturated NH4Cl solution (300 mL)
  6. customThe layers were separated
  7. extractionthe aqueous layer was extracted with ether (3×100 mL)
  8. washwashed with brine (300 mL)
  9. dry with materialdried over MgSO4
  10. filtrationfiltered
  11. concentrationconcentrated
  12. customchromatographed through a Redi-Sep pre-packed silica gel column (330 g)
  13. washeluting with a gradient of 10% to 20% EtOAc in hexanes

출처 및 근거

ORD 기록
ord-7fb2a574f173497fa98863266f68e1ea
출처 데이터셋
uspto-grants-2011_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08084479B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트