돌아가기
Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
HRID 66777생성일: 2026년 10월 27일

Benzene → Methyl tris(3,3-dimethylbutyl)tin

https://huagongshe.com/reaction/66777

반응식

참여 물질

역할이름HCID투입량
반응물BenzeneHCID 241—
반응물Citric AcidHCID 311—
반응물1-Chloro-3,3-dimethylbutaneHCID 76111—
반응물TrichloromethylstannaneHCID 101940—
반응물MagnesiumHCID 5462224—
반응물HCID 178444610HCID 178444610—
촉매1,2-DibromoethaneHCID 7839—
용매WaterHCID 962—
용매TetrahydrofuranHCID 8028—
생성물Methyl tris(3,3-dimethylbutyl)tinHCID 2052927856%

반응 조건

온도40 °C

반응 단계

A reaction vessel was charged with 12.16 g. (0.5 g.atom) of magnesium chips and 15 c.c. of a solution containing 60.3 g. (0.5 mole) 1-chloro-3,3-dimethylbutane dissolved in 200 c.c. of tetrahydrofuran. A nitrogen atmosphere was established within the vessel. The reaction was initiated by the addition of a few drops of ethylene dibromide, whereupon the remaining portion of the aforementioned tetrahydrofuran solution was added over a period of 1.5 hours. External heating was applied to maintain the reaction mixture at the boiling point. Heating was continued for 1 hour following completion of the addition, at which time the liquid phase was separated from the unreacted magnesium (0.32 g.) by decantation. A portion of this liquid phase containing 0.44 mole of 3,3-dimethylbutylmagnesium chloride was charged into a reaction vessel containing a nitrogen atmosphere. A solution of 31.2 g. (0.13 mole) of methyltin trichloride dissolved in 100 c.c. benzene was gradually added over 0.33 hours to the stirred contents of the reaction vessel. External cooling was applied as required to maintain the reaction mixture at 40° C. Following completion of the addition the resultant mixture was stirred for about 16 hours at ambient temperature, after which the contents of the reaction vessel were heated at the boiling point for 1 hour, then hydrolyzed using a solution of citric acid (50 g.) in 250 c.c. water. The organic phase was then separated, dried using a portion of anhydrous magnesium sulfate and the organic solvents removed under reduced pressure while the mixture was maintained at a temperature of about 40° C. The resultant colorless oil, obtained in 97% yield, was purified by combining a 35 g. portion of the oil with methanol, cooling the mixture to -20° C. and triturating the semi-solid mass. The white solid was isolated and recrystallized using a 60/40 volume ratio mixture of methanol/ethanol to yield methyl tris(3,3-dimethylbutyl)tin in 56% yield, based on starting materials.

출처 및 근거

DOI10.6084/m9.figshare.5104873.v1
특허 번호US04343815
출처 데이터셋uspto-grants-1982_08
ORD IDord-0fb57646dd3c4fe3a8d677b283c29cb4
출처 메모uspto-grants-1982_08