홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Ammonia → 2-Amino-4,5-difluorobenzoic acid

HRID 66948
노트
인쇄 미리보기

반응식

HRID 66948 반응식
[NH3:1].[F:2][C:3]1[CH:4]=[C:5]2C(=O)[O:9][C:7](=[O:8])[C:6]2=[CH:12][C:13]=1[F:14]>C(COC)OC>[F:2][C:3]1[CH:4]=[C:5]([NH2:1])[C:6](=[CH:12][C:13]=1[F:14])[C:7]([OH:9])=[O:8]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 222AmmoniaHCID 6397454,5-Difluorophthalic Anhydride

생성물 1

HCID 7359652-Amino-4,5-difluorobenzoic acid

시약·촉매·용매 1

HCID 80711,2-Dimethoxyethane용매2회

반응 조건

온도
50 °C

실험 절차

Dimethoxyethane (43 parts) was charged to a reactor and ammonia was bubbled in to form a saturated solution. The ammonia addition was maintained while a solution of 1.84 parts of 4,5-difluorophthalic anhydride in 13 parts of dimethoxyethane was added slowly over a period of 0.5 hours. The reaction mixture was stirred for an additional 5 minute period and the dimethoxyethane was removed by vacuum distillation. The remaining white solid (the ammonium salt of 4,5-difluorophthalamic acid) was dissolved in 20 parts of aqueous sodium hydroxide (40% NaOH) and the solution was de-gassed under moderately reduced pressure to remove any remaining ammonia; then heated at atmospheric pressure, to 50° C. and maintained at tha temperature while 14.1 parts of a 5.78% aqueous sodium hypochlorite solution was added. The solution was then heated to 60°-65° C. and maintained at that temperature, with stirring for about 30 minutes; then cooled to about 20°-25° C. and acidified to a pH of 4-6, by addition of concentrated hydrochloric acid. A precipitate formed and the mixture was extracted with chloroform. The acidification procedure was repeated until no additional precipitate formed. The combined extracts were dried over anhydrous sodium sulfate, filtered, and the chloroform removed by vacuum distillation to yield 1.34 parts of solid 4,5-difluoroanthranilic acid having a melting point of 180°-181° C. The chemical structure of the product was confirmed by infra-red analysis.

후처리

  1. customammonia was bubbled in
  2. customto form a saturated solution
  3. additionwas added slowly over a period of 0.5 hours
  4. customthe dimethoxyethane was removed by vacuum distillation
  5. dissolutionThe remaining white solid (the ammonium salt of 4,5-difluorophthalamic acid) was dissolved in 20 parts of aqueous sodium hydroxide (40% NaOH)
  6. customthe solution was de-gassed under moderately reduced pressure
  7. customto remove any remaining ammonia
  8. temperaturemaintained at tha temperature while 14.1 parts of a 5.78% aqueous sodium hypochlorite solution
  9. additionwas added
  10. temperatureThe solution was then heated to 60°-65° C.
  11. temperaturemaintained at that temperature
  12. stirringwith stirring for about 30 minutes
  13. temperaturethen cooled to about 20°-25° C.
  14. additionacidified to a pH of 4-6, by addition of concentrated hydrochloric acid
  15. customA precipitate formed
  16. extractionthe mixture was extracted with chloroform
  17. customformed
  18. dry with materialThe combined extracts were dried over anhydrous sodium sulfate
  19. filtrationfiltered
  20. customthe chloroform removed by vacuum distillation

출처 및 근거

ORD 기록
ord-435fedb8aa08432e9fd88e58b237bf34
출처 데이터셋
uspto-grants-1982_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04343951

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트