홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1-Nonanol, 9-bromo- → 9-Bromononanal

HRID 724565
인쇄

반응식

HRID 724565 반응식
[Br:1][CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH2:10][OH:11].C(=O)(O)[O-].[Na+].[Br-].[K+].S(=O)(O)[O-].[Na+]>O.ClCCl>[Br:1][CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH:10]=[O:11]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 1087001-Nonanol, 9-bromo-HCID 253877Potassium BromideHCID 516892Sodium BicarbonateHCID 23665763Sodium Bisulfite

생성물 1

HCID 5433309-Bromononanal수율 94%

시약·촉매·용매 2

HCID 962Water용매2회
HCID 6344
Dichloromethane
용매

반응 조건

온도
5 °C

실험 절차

To a 100-mL round-bottomed flask equipped with a magnetic stirrer, addition funnel and temperature controller, under nitrogen, was added 9-bromononanol (8.92 g, 40 mmol) and dichloromethane (30 mL). The resulting mixture was cooled to 5° C. and a solution of sodium bicarbonate (0.47 g, 5.6 mmol) and potassium bromide (0.48 g, 4 mmol) in water (10 mL) was added. 2,2,6,6-Tetramethyl-1-piperidinyloxy free radical (TEMPO) (63 mg, 0.4 mmol) was added and then a 10 to 13% bleach solution (27 mL) was added dropwise through the addition funnel at a rate such that the temperature was maintained at about 8° C. (+/−2° C.) with an ice cold bath (over about 40 min.). After addition of the bleach was complete, the mixture was stirred for 30 min. while maintaining the temperature at about 0° C. A solution of sodium bisulfite (1.54 g) in water (10 mL) was added and the resulting mixture was stirred at room temperature for 30 min. The layers of the mixture were then separated, and the milky aqueous layer was extracted with dichloromethane (1×20 mL). The combined dichloromethane layers were then washed with water (1×30 mL), dried (MgSO4), filtered and concentrated under reduced pressure to afford the title intermediate (8.3 g, 94% yield), which was used without further purification in the next step.

후처리

  1. customTo a 100-mL round-bottomed flask equipped with a magnetic stirrer, addition funnel
  2. addition2,2,6,6-Tetramethyl-1-piperidinyloxy free radical (TEMPO) (63 mg, 0.4 mmol) was added
  3. temperaturewas maintained at about 8° C. (+/−2° C.) with an ice cold bath (over about 40 min.)
  4. additionAfter addition of the bleach
  5. temperaturewhile maintaining the temperature at about 0° C
  6. stirringthe resulting mixture was stirred at room temperature for 30 min
  7. customThe layers of the mixture were then separated
  8. extractionthe milky aqueous layer was extracted with dichloromethane (1×20 mL)
  9. washThe combined dichloromethane layers were then washed with water (1×30 mL)
  10. dry with materialdried (MgSO4)
  11. filtrationfiltered
  12. concentrationconcentrated under reduced pressure

출처 및 근거

ORD 기록
ord-49223e46292f4b25bf7259ca304d73ff
출처 데이터셋
uspto-grants-2006_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07141671B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트