Acetic Acid → Biphenyl-2-ylcarbamic Acid 1-(9-{Benzyl-[(R)-2-(8-benzyloxy-2-oxo-1,2-dihydroquinolin-5-yl)-2-(tert-butyldimethylsilanyloxy)ethyl]amino}nonyl)-piperidin-4-yl Ester

HRID 724568노트

반응식

HRID 724568 반응식
[CH2:1]([NH:8][CH2:9][C@@H:10]([C:19]1[CH:28]=[CH:27][C:26]([O:29][CH2:30][C:31]2[CH:36]=[CH:35][CH:34]=[CH:33][CH:32]=2)=[C:25]2[C:20]=1[CH:21]=[CH:22][C:23](=[O:37])[NH:24]2)[O:11][Si:12]([C:15]([CH3:18])([CH3:17])[CH3:16])([CH3:14])[CH3:13])[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.C(O)(=O)C.O=[CH:43][CH2:44][CH2:45][CH2:46][CH2:47][CH2:48][CH2:49][CH2:50][CH2:51][N:52]1[CH2:57][CH2:56][CH:55]([O:58][C:59](=[O:73])[NH:60][C:61]2[CH:66]=[CH:65][CH:64]=[CH:63][C:62]=2[C:67]2[CH:72]=[CH:71][CH:70]=[CH:69][CH:68]=2)[CH2:54][CH2:53]1.C(O[BH-](OC(=O)C)OC(=O)C)(=O)C.[Na+].C(=O)(O)[O-].[Na+]>ClCCl>[CH2:1]([N:8]([CH2:9][C@@H:10]([C:19]1[CH:28]=[CH:27][C:26]([O:29][CH2:30][C:31]2[CH:32]=[CH:33][CH:34]=[CH:35][CH:36]=2)=[C:25]2[C:20]=1[CH:21]=[CH:22][C:23](=[O:37])[NH:24]2)[O:11][Si:12]([C:15]([CH3:18])([CH3:17])[CH3:16])([CH3:14])[CH3:13])[CH2:43][CH2:44][CH2:45][CH2:46][CH2:47][CH2:48][CH2:49][CH2:50][CH2:51][N:52]1[CH2:53][CH2:54][CH:55]([O:58][C:59](=[O:73])[NH:60][C:61]2[CH:66]=[CH:65][CH:64]=[CH:63][C:62]=2[C:67]2[CH:68]=[CH:69][CH:70]=[CH:71][CH:72]=2)[CH2:56][CH2:57]1)[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1

참가 물질

7

반응물 5

HCID 176Acetic AcidHCID 516892Sodium BicarbonateHCID 5049666Sodium triacetoxyborohydrideHCID 666727545-[(R)-2-benzylamino 1-(tert-butyldimethylsilanyloxy)ethyl]-8-benzyloxy-1H-quinolin-2-oneHCID 85988898Biphenyl-2-ylcarbamic Acid 1-(9-Oxononyl)piperidin-4-yl Ester

생성물 1

HCID 86600266Biphenyl-2-ylcarbamic Acid 1-(9-{Benzyl-[(R)-2-(8-benzyloxy-2-oxo-1,2-dihydroquinolin-5-yl)-2-(tert-butyldimethylsilanyloxy)ethyl]amino}nonyl)-piperidin-4-yl Ester수율 93.4%

시약·촉매·용매 1

HCID 6344Dichloromethane용매

반응 조건

온도
0 °C

실험 절차

To a 300 mL round-bottomed flask was added 5-[(R)-2-benzylamino-1-(tert-butyldimethylsilanyloxy)ethyl]-8-benzyloxy-1H-quinolin-2-one (5 g, 9.73 mmol), dichloromethane (100 mL) and glacial acetic acid (0.6 mL, 10 mmol). This mixture was cooled to 0° C. using an ice bath and biphenyl-2-ylcarbamic acid 1-(9-oxononyl)piperidin-4-yl ester (4.6 g, 9.73 mmol) was added with stirring. This mixture was stirred at 0° C. for 30 minutes and then sodium triacetoxyborohydride (6.15 g, 29 mmol) was added in portions over 15 minutes. The reaction mixture was stirred at 0° to 10° C. for 2 hours and then aqueous saturated sodium bicarbonate solution (50 mL) was added and this mixture was stirred for 15 minutes. The layers were then separated and the organic layer was washed with 5% aqueous sodium chloride solution (50 mL), dried (MgSO4), filtered and concentrated under reduced pressure to afford the title intermediate (8.5 g, 80% purity by HPLC), which was used without further purification.

후처리

  1. stirringThis mixture was stirred at 0° C. for 30 minutes
  2. stirringThe reaction mixture was stirred at 0° to 10° C. for 2 hours
  3. stirringthis mixture was stirred for 15 minutes
  4. customThe layers were then separated
  5. washthe organic layer was washed with 5% aqueous sodium chloride solution (50 mL)
  6. dry with materialdried (MgSO4)
  7. filtrationfiltered
  8. concentrationconcentrated under reduced pressure

출처 및 근거

ORD 기록
ord-c66d0dc6bebd4be0b3836e3acf7b2f7c
출처 데이터셋
uspto-grants-2006_11
특허 번호
US07141671B2

반응 노트

불러오는 중…