CID 87901241 → Pepsamar

HRID 725709

반응식

HRID 725709 반응식
[CH2:1]([O:13][CH2:14][CH2:15][CH2:16][CH2:17][CH2:18][CH2:19][CH2:20][CH2:21][CH2:22][CH2:23][CH2:24][CH3:25])[CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH2:10][CH2:11][CH3:12].[Al:26]>[O-2].[O-2].[Ti+4]>[CH2:14]([O:13][CH2:1][CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH2:10][CH2:11][CH3:12])[CH2:15][CH2:16][CH2:17][CH2:18][CH2:19][CH2:20][CH2:21][CH2:22][CH2:23][CH2:24][CH3:25].[Al:26].[OH2:13].[OH2:13].[OH2:13].[OH2:13].[Al:26]

참가 물질

4

반응물 1

HCID 87901241CID 87901241

생성물 2

HCID 6328660PepsamarHCID 87901241CID 87901241

시약·촉매·용매 1

HCID 162651Titanium oxide (Ti3O)촉매

실험 절차

Aluminum dodecyloxide was prepared in the same manner as in Example 1. The aluminum dodecyloxide was hydrolyzed to obtain an alumina slurry in the same manner as in Example 1 (Examples 5 and 6). Titanium dioxide was added in the same manner as in Example 3 (Examples 7 and 8). The pH and the solid content of the alumina slurry was adjusted in the same manner as in Example 1. The alumina slurry was aged under the conditions shown in Table 1 to obtain a colloidal sol of the alumina hydrate. The resulting colloidal sol of alumina hydrate was concentrated to a solid concentration of 15%. The colloidal sol of the alumina hydrate was spray-dried in the same manner as in Example 1 at the inlet temperature of 90° C. to obtain powdery alumina hydrate. Properties of the alumna hydrate were measured as described above. The measured properties are shown in Table 1.

후처리

  1. customto obtain an alumina slurry in the same manner as in Example 1 (Examples 5 and 6)

출처 및 근거

ORD 기록
ord-4172889f4e1446c39b661fb39e356417
출처 데이터셋
uspto-grants-1998_01
특허 번호
US05707716

연결된 노트

불러오는 중…