홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

4-Hydroxy-3-methylsulfanylbenzoic acid → 4-Hydroxymethyl-2-methylsulfanylphenol

HRID 730037
노트
인쇄 미리보기

반응식

HRID 730037 반응식
[OH:1][C:2]1[CH:10]=[CH:9][C:5]([C:6](O)=[O:7])=[CH:4][C:3]=1[S:11][CH3:12].[H-].[H-].[H-].[H-].[Li+].[Al+3]>O1CCCC1>[OH:7][CH2:6][C:5]1[CH:9]=[CH:10][C:2]([OH:1])=[C:3]([S:11][CH3:12])[CH:4]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 109321014-Hydroxy-3-methylsulfanylbenzoic acidHCID 21226445Aluminium lithium hydride

생성물 1

HCID 117450634-Hydroxymethyl-2-methylsulfanylphenol

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매2회

반응 조건

온도
60 °C

실험 절차

With ice-cooling, a solution of 7d (1.37 g; 7.4 mmol) in abs. tetrahydrofuran (THF; 15 ml) was added to a suspension of 95% pure LiAlH4 (0.55 g; 14 mmol) in absolute THF (10 ml) in a three-necked flask (which had been dried by heating and flushed with argon) such that there was only a moderate evolution of gas. After the addition had ended, cooling was removed and the reaction mixture was stirred at room temperature for 30 min and at 55-65° C. for a further 21 h. With ice-cooling, ice-water was added to the reaction mixture. The precipitate of Al(OH)3 was dissolved by adding 10% strength sulfuric acid, and the aqueous-acidic solution (pH 1) was extracted with diethyl ether (3×50 ml). The combined ethereal extract was extracted with 10% strength aqueous sodium hydroxide solution (2×25 ml). The combined sodium hydroxide solution was neutralized with 20% strength hydrochloric acid. The precipitate (8c) was filtered off, washed with H2O and dried. A further charge of 8c was obtained by extraction of the neutral aqueous solution with diethyl ether. The ethereal extract was washed with saturated NaCl solution, dried over Na2SO4 and concentrated: crystalline white solid.

후처리

  1. temperatureWith ice-cooling
  2. custom(which had been dried by heating and flushed with argon) such that there
  3. additionAfter the addition
  4. temperaturecooling
  5. customwas removed
  6. temperatureWith ice-cooling
  7. additionice-water was added to the reaction mixture
  8. dissolutionThe precipitate of Al(OH)3 was dissolved
  9. additionby adding 10% strength sulfuric acid
  10. extractionthe aqueous-acidic solution (pH 1) was extracted with diethyl ether (3×50 ml)
  11. extractionThe combined ethereal extract
  12. extractionwas extracted with 10% strength aqueous sodium hydroxide solution (2×25 ml)
  13. filtrationThe precipitate (8c) was filtered off
  14. washwashed with H2O
  15. customdried
  16. additionA further charge of 8c
  17. customwas obtained by extraction of the neutral aqueous solution with diethyl ether
  18. extractionThe ethereal extract
  19. washwas washed with saturated NaCl solution
  20. dry with materialdried over Na2SO4
  21. concentrationconcentrated

출처 및 근거

ORD 기록
ord-73ddc196d0b84a0685d81cd6b7ee9789
출처 데이터셋
uspto-grants-2009_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07582660B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트