홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → 2-benzyl-3-hydroxy-2,3-dihydro-1H-isoindol-1-one

HRID 733224
인쇄

반응식

HRID 733224 반응식
[CH2:1]([N:8]1[C:12](=[O:13])[C:11]2=[CH:14][CH:15]=[CH:16][CH:17]=[C:10]2[C:9]1=[O:18])[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.O>CO.[BH4-].[K+]>[OH:13][CH:12]1[C:11]2[C:10](=[CH:17][CH:16]=[CH:15][CH:14]=2)[C:9](=[O:18])[N:8]1[CH2:1][C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 962WaterHCID 75059Benzylphthalimide

생성물 1

HCID 32407432-benzyl-3-hydroxy-2,3-dihydro-1H-isoindol-1-one수율 92.4%

시약·촉매·용매 2

HCID 887Methanol용매HCID 4192641Potassium borohydride용매

반응 조건

온도
20 °C

실험 절차

3-Hydroxy-2-benzyl-2,3-dihydroisoindol-1-one is prepared as described in Example 1, starting with 10.2 g of N-benzylphthalimide in 100 cm3 of methanol and 2.6 g of potassium borohydride. The reaction mixture is stirred at a temperature in the region of 20° C. for 20 hours and is then cooled to a temperature in the region of 0° C. and 50 cm3 of distilled water are added dropwise. The methanol is then partially evaporated off under reduced pressure (2 kPa) at a temperature in the region of 40° C., followed by addition of a further 50 cm3 of distilled water. The aqueous phase is extracted 3 times with 50 cm3 of ethyl acetate. The organic extracts are combined, washed with 50 cm3 of brine, dried over magnesium sulfate, filtered and then concentrated to dryness under reduced pressure (2 kPa) at a temperature in the region of 40° C. The residue is dried in a desiccator under reduced pressure (2 kPa) at a temperature in the region of 20° C. 9.5 g of 3-hydroxy-2-benzyl-2,3-dihydroisoindol-1-one are thus obtained in the form of a white powder. (Rf=0.20, thin layer chromatography on silica gel, eluent: cyclohexane/ethyl acetate (75/25 by volume)).

후처리

  1. custom3-Hydroxy-2-benzyl-2,3-dihydroisoindol-1-one is prepared
  2. additionare added dropwise
  3. customThe methanol is then partially evaporated off under reduced pressure (2 kPa) at a temperature in the region of 40° C.
  4. additionfollowed by addition of a further 50 cm3 of distilled water
  5. extractionThe aqueous phase is extracted 3 times with 50 cm3 of ethyl acetate
  6. washwashed with 50 cm3 of brine
  7. dry with materialdried over magnesium sulfate
  8. filtrationfiltered
  9. concentrationconcentrated to dryness under reduced pressure (2 kPa) at a temperature in the region of 40° C
  10. customThe residue is dried in a desiccator under reduced pressure (2 kPa) at a temperature in the region of 20° C

출처 및 근거

ORD 기록
ord-d38d4753c0c347ec81733a984ad06f70
출처 데이터셋
uspto-grants-2009_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07589117B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트