홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

p-Toluenesulfonic acid → 4-tert-butyl-N-isobutylphthalimide

HRID 733229
인쇄

반응식

HRID 733229 반응식
[C:1]([C:5]1[CH:6]=[C:7]2[C:12](=[O:13])[O:11][C:9](=O)[C:8]2=[CH:14][CH:15]=1)([CH3:4])([CH3:3])[CH3:2].[CH2:16]([NH2:20])[CH:17]([CH3:19])[CH3:18].C1(C)C=CC(S(O)(=O)=O)=CC=1>C1(C)C=CC=CC=1>[C:1]([C:5]1[CH:6]=[C:7]2[C:12](=[O:13])[N:20]([CH2:16][CH:17]([CH3:19])[CH3:18])[C:9](=[O:11])[C:8]2=[CH:14][CH:15]=1)([CH3:2])([CH3:3])[CH3:4]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 6101p-Toluenesulfonic acidHCID 6558IsobutylamineHCID 1229304-tert-Butylphthalic anhydride

생성물 1

HCID 220254784-tert-butyl-N-isobutylphthalimide

시약·촉매·용매 1

HCID 1140Toluene용매

반응 조건

온도
75 °C

실험 절차

4-tert-Butyl-N-isobutylphthalimide is prepared as described in Example 2, starting with 10 g of 4-tert-butylphthalic anhydride and 4.9 cm3 of isobutylamine in 100 cm3 of toluene. The reaction mixture is heated at a temperature in the region of 75° C. for 10 minutes, followed by addition of a catalytic amount of para-toluenesulfonic acid and the mixture is heated at a temperature in the region of 140° C. for 3 hours. After cooling to a temperature in the region of 60° C., the reaction mixture is concentrated to dryness under reduced pressure (2 kPa). The residue is taken up in a mixture of 50 cm3 of water and 30 cm3 of saturated aqueous sodium bicarbonate solution and the aqueous phase is extracted twice with 200 cm3 of dichloromethane. The organic extracts are combined, washed with 50 cm3 of brine, dried over magnesium sulfate, filtered and then concentrated to dryness under reduced pressure (2 kPa) at a temperature in the region of 40° C. The residue is dried in a desiccator under reduced pressure (2 kPa) at a temperature in the region of 20° C. 10.4 g of 4-tert-butyl-N-isobutylphthalimide are thus obtained in the form of a viscous yellow oil. (Rf=0.75, thin layer chromatography on silica gel, eluent: cyclohexane/ethyl acetate (75/25 by volume)).

후처리

  1. custom4-tert-Butyl-N-isobutylphthalimide is prepared
  2. temperaturethe mixture is heated at a temperature in the region of 140° C. for 3 hours
  3. temperatureAfter cooling to a temperature in the region of 60° C.
  4. concentrationthe reaction mixture is concentrated to dryness under reduced pressure (2 kPa)
  5. additionThe residue is taken up in a mixture of 50 cm3 of water and 30 cm3 of saturated aqueous sodium bicarbonate solution
  6. extractionthe aqueous phase is extracted twice with 200 cm3 of dichloromethane
  7. washwashed with 50 cm3 of brine
  8. dry with materialdried over magnesium sulfate
  9. filtrationfiltered
  10. concentrationconcentrated to dryness under reduced pressure (2 kPa) at a temperature in the region of 40° C
  11. customThe residue is dried in a desiccator under reduced pressure (2 kPa) at a temperature in the region of 20° C

출처 및 근거

ORD 기록
ord-5cb9dca7f4f84596a1f3fe94fffce116
출처 데이터셋
uspto-grants-2009_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07589117B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트