홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → 4,7-Difluoro-3-hydroxy-2-isobutyl-2,3-dihydroisoindol-1-one

HRID 733256
인쇄

반응식

HRID 733256 반응식
[F:1][C:2]1[CH:16]=[CH:15][C:14]([F:17])=[C:4]2[C:5]([N:7]([CH2:10][CH:11]([CH3:13])[CH3:12])[C:8](=[O:9])[C:3]=12)=[O:6].O>CO.[BH4-].[K+]>[F:1][C:2]1[CH:16]=[CH:15][C:14]([F:17])=[C:4]2[C:3]=1[CH:8]([OH:9])[N:7]([CH2:10][CH:11]([CH3:12])[CH3:13])[C:5]2=[O:6]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 962WaterHCID 220254173,6-difluoro-N-isobutylphthalimide

생성물 1

HCID 179664254,7-Difluoro-3-hydroxy-2-isobutyl-2,3-dihydroisoindol-1-one수율 87.9%

시약·촉매·용매 2

HCID 887Methanol용매HCID 4192641Potassium borohydride용매

반응 조건

온도
20 °C

실험 절차

4,7-Difluoro-3-hydroxy-2-isobutyl-2,3-dihydroisoindol-1-one is prepared as described in Example 1, starting with 6.41 g of 3,6-difluoro-N-isobutylphthalimide in 70 cm3 of methanol and 1.44 g of potassium borohydride. The reaction mixture is stirred at a temperature in the region of 20° C. for 3 hours and is then cooled to a temperature in the region of 0° C. and 45 cm3 of distilled water are added dropwise. The methanol is then partially evaporated off under reduced pressure (2 kPa) at a temperature in the region of 30° C., followed by addition of 80 cm3 of dichloromethane. After separation of the phases by settling, the aqueous phase is extracted twice with 80 cm3 of dichloromethane. The organic extracts are combined, dried over magnesium sulfate, filtered and then concentrated to dryness under reduced pressure (2 kPa) at a temperature in the region of 30° C. The residue is dried in a desiccator under reduced pressure (2 kPa) at a temperature in the region of 20° C. 5.68 g of 4,7-difluoro-3-hydroxy-2-isobutyl-2,3-dihydroisoindol-1-one are thus obtained in the form of a yellow solid melting at 129.5° C. (Rf=0.48, thin layer chromatography on silica gel, eluent: cyclohexane/ethyl acetate (50/50 by volume)).

후처리

  1. custom4,7-Difluoro-3-hydroxy-2-isobutyl-2,3-dihydroisoindol-1-one is prepared
  2. additionare added dropwise
  3. customThe methanol is then partially evaporated off under reduced pressure (2 kPa) at a temperature in the region of 30° C.
  4. additionfollowed by addition of 80 cm3 of dichloromethane
  5. customAfter separation of the phases
  6. extractionthe aqueous phase is extracted twice with 80 cm3 of dichloromethane
  7. dry with materialdried over magnesium sulfate
  8. filtrationfiltered
  9. concentrationconcentrated to dryness under reduced pressure (2 kPa) at a temperature in the region of 30° C
  10. customThe residue is dried in a desiccator under reduced pressure (2 kPa) at a temperature in the region of 20° C

출처 및 근거

ORD 기록
ord-e85c875821c04067a2f7a16a2277296b
출처 데이터셋
uspto-grants-2009_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07589117B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트