홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1,3,5-Trichloro-2,4,6-trifluorobenzene → 1,3,5-Trifluorobenzene

HRID 736963
인쇄

반응식

HRID 736963 반응식
Cl[C:2]1[C:7]([F:8])=[C:6](Cl)[C:5]([F:10])=[C:4](Cl)[C:3]=1[F:12].C([O-])(=O)C.[Na+]>[Pd].O>[F:8][C:7]1[CH:2]=[C:3]([F:12])[CH:4]=[C:5]([F:10])[CH:6]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 675731,3,5-Trichloro-2,4,6-trifluorobenzeneHCID 517045Sodium Acetate

생성물 1

HCID 97451,3,5-Trifluorobenzene수율 88.2%

시약·촉매·용매 2

HCID 23938Palladium촉매HCID 962Water용매

반응 조건

온도
140 °C

실험 절차

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

Palladium on carbon (10%, 410 mg), 100 g of water, 21.8 g of 1,3,5-trichloro-2,4,6-trifluorobenzene and 32.9 g of sodium acetate (4.5 equivalents) were placed in a pressure vessel. After flushing with nitrogen, the pressure vessel was heated to 140° C. and pressurized with 12 bar of hydrogen. A hydrogen pressure of 12 bar was maintained at 140° C. for about 12 hours while stirring vigorously. After cooling to 20-25° C., the pressure vessel was depressurized. The two-phase reaction solution was filtered and the phases were then separated. This gave a yield of 88.2% of 1,3,5-trifluorobenzene.

후처리

  1. customAfter flushing with nitrogen
  2. temperatureA hydrogen pressure of 12 bar was maintained at 140° C. for about 12 hours
  3. temperatureAfter cooling to 20-25° C.
  4. customThe two-phase reaction solution
  5. filtrationwas filtered
  6. customthe phases were then separated

출처 및 근거

ORD 기록
ord-c4bdb7eec03f462c993e6fd1a1db2208
출처 데이터셋
uspto-grants-2009_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07595426B2

반응 노트