홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

2-Methyl-2-butene → 1H-Indole-3-carboxylic acid, 2-chloro-

HRID 743168
인쇄

반응식

HRID 743168 반응식
[Cl:1][C:2]1[NH:3][C:4]2[C:9]([C:10]=1[CH:11]=[O:12])=[CH:8][CH:7]=[CH:6][CH:5]=2.CC(=CC)C.Cl([O-])=[O:19].[Na+].O.P([O-])(O)(O)=O.[Na+]>O.C(OCC)(=O)C.O1CCOCC1>[Cl:1][C:2]1[NH:3][C:4]2[C:9]([C:10]=1[C:11]([OH:19])=[O:12])=[CH:8][CH:7]=[CH:6][CH:5]=2
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 105532-Methyl-2-buteneHCID 3147912-chloro-1H-indole-3-carbaldehydeHCID 516949Sodium Phosphate, Monobasic, Monohydrate2회HCID 23668197Sodium Chlorite2회

생성물 1

HCID 995211H-Indole-3-carboxylic acid, 2-chloro-수율 47.2%

시약·촉매·용매 3

HCID 962
Water
용매
2회
HCID 8857Ethyl Acetate용매
HCID 312751,4-Dioxane용매

반응 조건

온도
25 °C

실험 절차

A mechanically stirred suspension of 15 g (83.5 mmol) of 2-chloroindole-3-carboxaldehyde [XXVI: R1 =R3 =H, X=Cl] (Schule, et al., Arch. Pharm. [Weinheim] 1972;305:523-533), 84 mL of 2-methyl-2-butene, and 200 mL of p-dioxane in an ice bath was treated with a solution of 40 g each of sodium chlorite and sodium dihydrogen phosphate monohydrate in 200 mL of water. The biphasic mixture was then stirred vigorously at 25° C. for 3.5 hours. An additional 16 g each of solid sodium chlorite and sodium dihydrogen phosphate monohydrate was added and the mixture was stirred for another 3.5 hours. The mixture was diluted with 350 mL of ethyl acetate and 200 mL of water. The layers were separated and the aqueous phase was extracted with 300 mL of ethyl acetate. The combined organic extracts were extracted with cold 2% aqueous NaOH (3×200 mL). The basic extracts were combined and acidified to pH 4 with 6N aqueous HCl. The precipitated solids were collected by filtration, washed well with water, and air dried overnight. The solids were dissolved in 150 mL of hot acetone and the solution was treated with 65 mL of hexane. After storage at 3° C. for 20 hours, the solids were collected by filtration, washed with cold acetone, and dried to leave 7.71 g of pure 2-chloroindole-3-carboxylic acid [XXVII: R1 =R3 =H, X=Cl] as an off-white solid; mp 181.5° C. (dec). Further processing of the filtrate as above afforded 2.41 g of a second crop; mp 179.5° C. (dec). Total yield 10.12 g (62%).

후처리

  1. stirringthe mixture was stirred for another 3.5 hours
  2. customThe layers were separated
  3. extractionthe aqueous phase was extracted with 300 mL of ethyl acetate
  4. extractionThe combined organic extracts were extracted with cold 2% aqueous NaOH (3×200 mL)
  5. filtrationThe precipitated solids were collected by filtration
  6. washwashed well with water, and air
  7. customdried overnight
  8. dissolutionThe solids were dissolved in 150 mL of hot acetone
  9. additionthe solution was treated with 65 mL of hexane
  10. waitAfter storage at 3° C. for 20 hours
  11. filtrationthe solids were collected by filtration
  12. washwashed with cold acetone
  13. customdried

출처 및 근거

ORD 기록
ord-aee63ddfe7ce4dbd88c827e421cf78a7
출처 데이터셋
uspto-grants-1996_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05556874

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트