홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Morpholine → (S)-1-(1-Methyl-6-morpholino-1H-pyrrolo[3,2-b]pyridin-5-yl)ethanamine

HRID 75294
인쇄

반응식

HRID 75294 반응식
CC([O-])(C)C.[K+].[NH:7]1[CH2:12][CH2:11][O:10][CH2:9][CH2:8]1.Br[C:14]1[CH:15]=[C:16]2[N:25]([CH3:26])[CH:24]=[CH:23][C:17]2=[N:18][C:19]=1[C@@H:20]([NH2:22])[CH3:21]>CC1CCCO1.C1(C)C=CC=CC=1>[CH3:26][N:25]1[C:16]2[C:17](=[N:18][C:19]([C@@H:20]([NH2:22])[CH3:21])=[C:14]([N:7]3[CH2:12][CH2:11][O:10][CH2:9][CH2:8]3)[CH:15]=2)[CH:23]=[CH:24]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 8083Morpholine2회HCID 23665647Potassium tert-butoxideHCID 86707977(S)-1-(6-Bromo-1-methyl-1H-pyrrolo[3,2-b]pyridin-5-yl)ethanamine

생성물 1

HCID 86707976(S)-1-(1-Methyl-6-morpholino-1H-pyrrolo[3,2-b]pyridin-5-yl)ethanamine수율 5.2%

시약·촉매·용매 2

HCID 1140Toluene용매
HCID 7301
2-Methyltetrahydrofuran
용매
2회

반응 조건

온도
92.5 °C

실험 절차

To a 100-mL three-neck round bottom flask equipped with an overhead stirrer, thermocouple, and condenser with gas inlet for nitrogen, was charged with KOt-Bu (95%, 8.3 g, 70.40 mmol, 4.0 eq) and 2-methyltetrahydrofuran (36 mL) followed by morpholine (18.5 mL, 210.6 mmol, 12.0 eq). The mixture was heated to 90-95° C. and then a solution of (S)-1-(6-bromo-1-methyl-1H-pyrrolo[3,2-b]pyridin-5-yl)ethan-1-amine (4.46 g, 210.6 mmol) in 2-methyltetrahydrofuran (9 mL) was added dropwise via a syringe pump over a period of one hour. Following addition of the amine, the transfer vessel was rinsed with 2-methyltetrahydrofuran (5 mL). The rinse was added to the reaction mixture, which was stirred at reflux for one hour. HPLC analysis indicated the reaction was complete. The slurry was then cooled to 60° C. and water (15 mL) was added, which dissolved the solids. The organic and aqueous phases were separated at 40-50° C. The aqueous phase was extracted with 2-methyltetrahydrofuran (20 mL) at 50° C. The organic layers were combined and concentrated under reduced pressure to afford crude product (9.0 g) which contained residual morpholine. The crude product was heated in hot toluene (30 mL). Some undissolved solids remained and the hot solution was decanted into a clean receiver. The toluene solution was cooled, resulting in crystallization of solids. The solution was further cooled in a refrigerator at 2-8° C. for one hour. The solids were filtered, washed with toluene (10 mL), and dried to afford the title compound as a tan solid (2.85 g).

후처리

  1. customTo a 100-mL three-neck round bottom flask equipped with an overhead stirrer
  2. washthe transfer vessel was rinsed with 2-methyltetrahydrofuran (5 mL)
  3. additionThe rinse was added to the reaction mixture, which
  4. temperatureat reflux for one hour
  5. temperatureThe slurry was then cooled to 60° C.
  6. additionwater (15 mL) was added
  7. dissolutionwhich dissolved the solids
  8. customThe organic and aqueous phases were separated at 40-50° C
  9. extractionThe aqueous phase was extracted with 2-methyltetrahydrofuran (20 mL) at 50° C
  10. concentrationconcentrated under reduced pressure
  11. customto afford crude product (9.0 g) which
  12. customthe hot solution was decanted into a clean receiver
  13. temperatureThe toluene solution was cooled
  14. customresulting in crystallization of solids
  15. temperatureThe solution was further cooled in a refrigerator at 2-8° C. for one hour
  16. filtrationThe solids were filtered
  17. washwashed with toluene (10 mL)
  18. customdried

출처 및 근거

ORD 기록
ord-f9599b0876f44bffb4f1d9113650809e
출처 데이터셋
uspto-grants-2014_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08835420B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트