홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Phorone → 2,2,6,6-Tetramethyl-1-(2',4',6'-triisopropylbiphenyl-2-yl)phosphinan-4-one

HRID 78967
인쇄

반응식

HRID 78967 반응식
[CH:1]([C:4]1[CH:9]=[C:8]([CH:10]([CH3:12])[CH3:11])[CH:7]=[C:6]([CH:13]([CH3:15])[CH3:14])[C:5]=1[C:16]1[CH:21]=[CH:20][CH:19]=[CH:18][C:17]=1[PH2:22])([CH3:3])[CH3:2].[CH3:23][C:24](=[CH:26][C:27](=[O:32])[CH:28]=[C:29]([CH3:31])[CH3:30])[CH3:25]>>[CH3:30][C:29]1([CH3:31])[CH2:28][C:27](=[O:32])[CH2:26][C:24]([CH3:25])([CH3:23])[P:22]1[C:17]1[CH:18]=[CH:19][CH:20]=[CH:21][C:16]=1[C:5]1[C:6]([CH:13]([CH3:14])[CH3:15])=[CH:7][C:8]([CH:10]([CH3:11])[CH3:12])=[CH:9][C:4]=1[CH:1]([CH3:2])[CH3:3]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 2

HCID 10438PhoroneHCID 58067324(2',4',6'-Triisopropylbiphenyl-2-yl)phosphine

생성물 1

HCID 580672642,2,6,6-Tetramethyl-1-(2',4',6'-triisopropylbiphenyl-2-yl)phosphinan-4-one수율 76.1%

실험 절차

A flask was charged with 10.8 g of (2′,4′,6′-triisopropylbiphenyl-2-yl)phosphine (66% potent, 7.13 g, 22.8 mmol, 1.0 equiv) and 6.6 g of 2,6-dimethyl-2,5-heptadien-4-one (47.7 mmol, 2.1 equiv). The vessel was purged with argon gas and immersed in an oil bath at 170° C. with magnetic stirring. The flask was sealed with a Teflon stopcock and the reaction was allowed to proceed under a static argon atmosphere. The flask was removed from the oil bath after 14 h and the contents allowed to cool to room temperature under argon gas. Anhydrous ethanol (70 mL) was added to the unpurified solids and the solids were broken up manually. The slurry was warmed to 80° C., held for an hour, and cooled to room temperature. The product was isolated by filtration, washes with ethanol and dried in vacuo to give 7.82 g of 2,2,6,6-tetramethyl-1-(2′,4′,6′-triisopropylbiphenyl-2-yl)phosphinan-4-one (98 area % by HPLC, 74% yield).

후처리

  1. customThe vessel was purged with argon gas
  2. customimmersed in an oil bath at 170° C. with magnetic stirring
  3. customThe flask was sealed with a Teflon stopcock
  4. customThe flask was removed from the oil bath after 14 h
  5. additionAnhydrous ethanol (70 mL) was added to the unpurified solids
  6. temperatureThe slurry was warmed to 80° C.
  7. waitheld for an hour
  8. temperaturecooled to room temperature
  9. customThe product was isolated by filtration, washes with ethanol
  10. customdried in vacuo

출처 및 근거

ORD 기록
ord-54673f2980d9402bb4a9a95815311f66
출처 데이터셋
uspto-grants-2014_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08841487B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트