홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methyl 1-isopropyl-1H-pyrazole-3-carboxylate → (1-(propan-2-yl)-1H-pyrazol-3-yl)methanol

HRID 79393
인쇄

반응식

HRID 79393 반응식
[CH:1]([N:4]1[CH:8]=[CH:7][C:6]([C:9](OC)=[O:10])=[N:5]1)([CH3:3])[CH3:2].[H-].[Al+3].[Li+].[H-].[H-].[H-]>CCOCC>[CH:1]([N:4]1[CH:8]=[CH:7][C:6]([CH2:9][OH:10])=[N:5]1)([CH3:3])[CH3:2]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 19576723Methyl 1-isopropyl-1H-pyrazole-3-carboxylateHCID 21226445Aluminium lithium hydride

생성물 1

HCID 23005538(1-(propan-2-yl)-1H-pyrazol-3-yl)methanol수율 83%

시약·촉매·용매 1

HCID 3283Diethyl Ether용매

실험 절차

To methyl 1-isopropyl-1H-pyrazole-3-carboxylate (5.0 g, 29.7 mmol) in anhydrous ether (0.5M, 60 mL) at 0° C. was added lithium aluminum hydride (32.7 mL, 32.7 mmol). The cold bath was removed and the mixture stirred for 3 hours. The mixture was poured slowly into an Erlenmeyer flask containing cold (0° C.) Rochelle's salt solution (1 L). After stirring for 1 hour, the mixture was diluted with Et2O (200 mL). The organic phase was separated, and the aqueous phase was further extracted with Et2O. The combined extracts were concentrated and dried under high vacuum to afford (1-isopropyl-1H-pyrazol-3-yl)methanol (3.45 g, 83% yield) as a clear oil.

후처리

  1. customThe cold bath was removed
  2. additionThe mixture was poured slowly into an Erlenmeyer flask
  3. additioncontaining cold (0° C.) Rochelle's salt solution (1 L)
  4. stirringAfter stirring for 1 hour
  5. additionthe mixture was diluted with Et2O (200 mL)
  6. customThe organic phase was separated
  7. extractionthe aqueous phase was further extracted with Et2O
  8. concentrationThe combined extracts were concentrated
  9. customdried under high vacuum

출처 및 근거

ORD 기록
ord-b4b3c32ed8364d62ac397fbb54ac89f1
출처 데이터셋
uspto-grants-2014_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08841455B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트