홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Calcium terephthalate trihydride → Calcium terephthalate

HRID 839484
인쇄

반응식

HRID 839484 반응식
[H-].[H-].[H-].[C:4]([O-:15])(=[O:14])[C:5]1[CH:13]=[CH:12][C:8]([C:9]([O-:11])=[O:10])=[CH:7][CH:6]=1.[Ca+2:16]>C(O)CO>[C:4]([O-:15])(=[O:14])[C:5]1[CH:13]=[CH:12][C:8]([C:9]([O-:11])=[O:10])=[CH:7][CH:6]=1.[Ca+2:16]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 1

HCID 70614338Calcium terephthalate trihydride

생성물 1

HCID 167516Calcium terephthalate

시약·촉매·용매 1

HCID 174Ethylene Glycol용매2회

실험 절차

In a 20-l container equipped with an agitator was placed 3.0 l of an aqueous solution of 10 wt/vol% of calcium chloride. With stirring 11.3 l of another aqueous solution of 5 wt/vol% of sodium terephthalate was added thereto. Simultaneously with the addition, the solution became milky turbid, which indicated the formation of calcium terephthalate. The agitation was continued for 30 minutes. Next, solid/liquid separation was carried out to obtain calcium terephthalate trihydride, which was then heated at 200° C for 2 hours until anhydride. The resulting particles were plate particles with a thickness of 2 to 4 microns and a maximum diameter of 10 to 30 microns. A portion sampled from the dried calcium terephthalate was introduced and milled for 1 hour in a ball mill and then diluted with ethylene glycol so as to obtain a slurry of 10 wt/vol% of calcium terephthalate in ethylene glycol. The resulting slurry was classified by means of a centrifugal separator, obtaining granular calcium terephthalate anhydride having an average particle diameter of 4.0 microns and a volume shape factor of 0.20.

후처리

  1. additionwas introduced
  2. custommilled for 1 hour in a ball mill

출처 및 근거

ORD 기록
ord-570f091509374fd7987cbb0749ff1380
출처 데이터셋
uspto-grants-1978_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04096109

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트