홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1,4-Butanediol → Butylene 4,4'-biphenyldicarboxylate

HRID 846830
인쇄

반응식

HRID 846830 반응식
[C:1]1(C2C=CC(C(OC)=O)=CC=2)C=CC=C(C(OC)=O)[CH:2]=1.[C:21]1([C:31]2[CH:36]=[CH:35][C:34]([C:37]([O:39][CH3:40])=[O:38])=[CH:33][CH:32]=2)[CH:26]=[CH:25][C:24]([C:27]([O:29][CH3:30])=[O:28])=[CH:23][CH:22]=1.C(O)CCCO>CC(C)[O-].CC(C)[O-].CC(C)[O-].CC(C)[O-].[Ti+4]>[C:31]12[C:21]3[CH:26]=[CH:25][C:24](=[CH:23][CH:22]=3)[C:27](=[O:28])[O:29][CH2:30][CH2:2][CH2:1][CH2:40][O:39][C:37](=[O:38])[C:34]([CH:35]=[CH:36]1)=[CH:33][CH:32]=2
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 80641,4-ButanediolHCID 13099Dimethyl 4,4'-biphenyldicarboxylateHCID 108747(1,1'-Biphenyl)-3,4'-dicarboxylic acid, 3,4'-dimethyl ester

생성물 1

HCID 86746069Butylene 4,4'-biphenyldicarboxylate

시약·촉매·용매 1

HCID 11026Titanium isopropoxide촉매

반응 조건

온도
281 °C

실험 절차

Dimethyl 3,4'-biphenyldicarboxylate (5.41 g, 0.0200 mole), 21.62 g (0.0800 mole) of dimethyl 4,4'-biphenyldicarboxylate, 18.24 g (0.200 mole) of 1,4-butanediol and 20 μL of titanium tetraisopropoxide are added to a 100-mL round bottom flask equipped with a paddle stirrer, 15-cm heated Vigreux column, distillation head, condenser and graduated receiver. The apparatus is evacuated and refilled with nitrogen three times. A molten salt bath preheated to 220° C. is raised around the flask and after the monomers have melted, the stirrer is started. Methanol begins to distill and after 20 minutes, 7.0 mL is collected. During the next 27 minutes, the temperature is increased to 281° C. then the pressure is slowly reduced to 1 mm Hg. The excess 1,4-butanediol distills and viscosity of the reaction mass slowly increases. After an additional 8 minutes, the clear colorless polymer melt becomes very viscous and the polymerization is stopped. As it cools, the polymer melt quickly crystallizes to an opaque white solid which is then ground to a course powder. The polymer's inherent viscosity is 1.16 dL/g and its peak melting point is 266° C.

후처리

  1. customequipped with a paddle stirrer
  2. temperature15-cm heated
  3. distillationVigreux column, distillation head, condenser
  4. customThe apparatus is evacuated
  5. additionrefilled with nitrogen three times
  6. customA molten salt bath preheated to 220° C.
  7. temperatureis raised around the flask
  8. distillationto distill and after 20 minutes
  9. custom7.0 mL is collected
  10. distillationThe excess 1,4-butanediol distills
  11. temperatureviscosity of the reaction mass slowly increases
  12. customthe polymer melt quickly crystallizes to an opaque white solid which

출처 및 근거

ORD 기록
ord-71a0f1c9aef04ff1aa2bc04c45d3dc3c
출처 데이터셋
uspto-grants-1992_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05138022

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트