홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Water → 1,1,1-Trifluoro-2-ethoxy-5-methyl-2,4-hexadiene

HRID 848760
노트
인쇄 미리보기

반응식

HRID 848760 반응식
C([Li])CCC.[Br-].[CH3:7][C:8]([CH3:30])=[CH:9][CH2:10][P+](C1C=CC=CC=1)(C1C=CC=CC=1)C1C=CC=CC=1.[CH2:31]([O:33][C:34](=O)[C:35]([F:38])([F:37])[F:36])[CH3:32].O>CCCCCC.O1CCCC1>[F:36][C:35]([F:38])([F:37])[C:34]([O:33][CH2:31][CH3:32])=[CH:10][CH:9]=[C:8]([CH3:30])[CH3:7]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 962WaterHCID 9794Ethyl trifluoroacetateHCID 3083722(3-Methylbut-2-enyl)triphenylphosphonium bromideHCID 178418339Butyllithium

생성물 1

HCID 539428611,1,1-Trifluoro-2-ethoxy-5-methyl-2,4-hexadiene수율 41.8%

시약·촉매·용매 2

HCID 8028Tetrahydrofuran
용매
HCID 8058Hexane용매

실험 절차

96 ml of a 20% strength solution of n-butyl-lithium in hexane were added dropwise to a suspension of 82.2 g (0.2 mol) of dry 3,3-dimethylallyl-triphenylphosphonium bromide in 300 ml of anhydrous tetrahydrofuran at 0° C. under nitrogen, while stirring. The deep red solution thus obtained was stirred at 0° C. for a further 15 minutes and 28.4 g (0.2 mol) of trifluoroacetic acid ethyl ester were then added dropwise at 0°-10° C. The mixture was then stirred at room temperature until it was almost decolorized (about 12 hours). 600 ml of water were then added to the reaction mixture and the mixture was extracted 5 times with 200 ml of petroleum ether each time. The petroleum ether phases were dried over magnesium sulphate and the solvent was then stripped off in a rotary evaporator under a waterpump vacuum. 150 ml of n-hexane were added to the residue and the mixture was then filtered. The solvent was subsequently distilled off from the filtrate under normal pressure and the oily residue was then distilled in vacuo. 16.2 g (41.8% of theory) of 1,1,1-trifluoro-2-ethoxy-5-methyl-2,4-hexadiene were obtained as a slightly yellowish liquid with a boiling point of 72° C./36 mbar.

후처리

  1. customThe deep red solution thus obtained
  2. stirringwas stirred at 0° C. for a further 15 minutes
  3. stirringThe mixture was then stirred at room temperature until it
  4. custom(about 12 hours)
  5. extractionthe mixture was extracted 5 times with 200 ml of petroleum ether each time
  6. dry with materialThe petroleum ether phases were dried over magnesium sulphate
  7. customthe solvent was then stripped off in a rotary evaporator under a waterpump vacuum
  8. addition150 ml of n-hexane were added to the residue
  9. filtrationthe mixture was then filtered
  10. distillationThe solvent was subsequently distilled off from the filtrate under normal pressure
  11. distillationthe oily residue was then distilled in vacuo

출처 및 근거

ORD 기록
ord-f98726502c114c28a9de705c460baaf6
출처 데이터셋
uspto-grants-1981_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04297366

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트