홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Carbon Dioxide → 5-chloro-6-fluoro-1H-indole-7-carboxylic acid

HRID 855209
노트
인쇄 미리보기

반응식

HRID 855209 반응식
[Li]CCCC.CCCCCC.[Cl:12][C:13]1[CH:14]=[C:15]2[C:19](=[CH:20][C:21]=1[F:22])[NH:18][CH:17]=[CH:16]2.CC([O-])(C)C.[K+].[C:29](=[O:31])=[O:30]>C1COCC1.O>[Cl:12][C:13]1[CH:14]=[C:15]2[C:19](=[C:20]([C:29]([OH:31])=[O:30])[C:21]=1[F:22])[NH:18][CH:17]=[CH:16]2
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 5

HCID 280Carbon DioxideHCID 8058HexaneHCID 27736475-chloro-6-fluoro-1H-indoleHCID 23665647Potassium tert-butoxideHCID 178418339Butyllithium

생성물 1

HCID 251136475-chloro-6-fluoro-1H-indole-7-carboxylic acid

시약·촉매·용매 2

HCID 962
Water
용매
HCID 8028Tetrahydrofuran용매3회

반응 조건

온도
10 °C

실험 절차

35 ml THF was cooled down to −75° C. under argon and 19.05 ml of a 1.6M solution of n-BuLi in hexane (30.5 mmol) were added. Then a solution of 2.35 g of 5-chloro-6-fluoro-1H-indole (13.7 mmol) in 9 ml THF was added dropwise (temperature kept between −70 and −75° C.) over 15 min. After 5 additional min stirring at this temperature a solution of 3.7 g potassium tert-butylate in 15 ml THF was added over 10 min (temperature kept between −70 and −75° C.). The brown solution was stirred 2 h at the same temperature and then treated with a large excess of solid CO2. The temperature was then raised to 10° C. over a period of 75 min, and treated with 30 ml water. After separation of the organic phase, the aqueous phase was extracted with 2×20 ml diethylether, treated with concentrated HCl until pH 1. The suspension was then filtered, the solid washed with water and dried in high vacuo. The residue was stirred with 10 ml hexane/diethylether 9:1 for 15 min and filtered, washed with 5 ml of the same mixture and the collected solid dried in high vacuo, leading to 2.2 g of 5-chloro-6-fluoro-1H-indole-7-carboxylic acid as a light brown solid (75%). MS: 212.2 (M−H)−.

후처리

  1. additionwas added over 10 min (temperature kept between −70 and −75° C.)
  2. customAfter separation of the organic phase
  3. extractionthe aqueous phase was extracted with 2×20 ml diethylether
  4. additiontreated with concentrated HCl until pH 1
  5. filtrationThe suspension was then filtered
  6. washthe solid washed with water
  7. customdried in high vacuo
  8. stirringThe residue was stirred with 10 ml hexane/diethylether 9:1 for 15 min
  9. filtrationfiltered
  10. washwashed with 5 ml of the same mixture
  11. customthe collected solid dried in high vacuo

출처 및 근거

ORD 기록
ord-388fcf3a043b4d23884f259d1bb7d1f4
출처 데이터셋
uspto-grants-2007_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07259183B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트