홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → 1-(4-Nitrobenzyl)-1H-1,2,4-triazole

HRID 865789
인쇄

반응식

HRID 865789 반응식
[N+:1]([C:4]1[CH:11]=[CH:10][C:7]([CH2:8]Br)=[CH:6][CH:5]=1)([O-:3])=[O:2].N[N:13]1[CH:17]=[N:16][N:15]=[CH:14]1.O>C(O)(C)C>[N+:1]([C:4]1[CH:11]=[CH:10][C:7]([CH2:8][N:15]2[CH:14]=[N:13][CH:17]=[N:16]2)=[CH:6][CH:5]=1)([O-:3])=[O:2]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 962WaterHCID 114324-Amino-1,2,4-triazoleHCID 660114-Nitrobenzyl bromide

생성물 1

HCID 64820001-(4-Nitrobenzyl)-1H-1,2,4-triazole수율 83.3%

시약·촉매·용매 1

HCID 3776Isopropanol용매2회

반응 조건

온도
-2 °C

실험 절차

4-Nitrobenzyl bromide (64.22 g), 4-amino-1,2,4-triazole (26 g) and isopropyl alcohol (586 ml) were stirred together at reflux for 71/2 hours. The isopropanol solvent was replaced with water by using an azeotropic distillation procedure, in vacuo, on a Buchi rotary evaporator. The volume of the final aqueous slurry was 750 ml. 675 ml of this slurry was cooled to -2° C. and hydrochloric acid (50.8 ml, 12 M) added over a few minutes. A solution of sodium nitrite (21.7 g) in water (86 ml) was then added dropwise, and subsurface over a 40 minute period. The temperature of the batch was kept between -2° and -1° C. during the addition and then allowed to warm to 18° C. over 30 minutes. The temperature was then increased to 28° C. and held for 1 hour and the solution treated with charcoal (4.5 g, Fisons) for 15 minutes. The charcoal was removed and the filtrate (750 ml) divided equally in two. One half of the solution was made basic with ammonia solution (22 ml) and the precipitated base collected, washed with water (2×30 ml) and dried (16 hours at 35° C. in vacuo). This gave an 83.3% yield (22.73 g) of 1-(4-nitrobenzyl)-1,2,4-triazole.

후처리

  1. temperatureat reflux for 71/2 hours
  2. distillationan azeotropic distillation procedure
  3. customin vacuo, on a Buchi rotary evaporator
  4. additionhydrochloric acid (50.8 ml, 12 M) added over a few minutes
  5. additionA solution of sodium nitrite (21.7 g) in water (86 ml) was then added dropwise
  6. additionThe temperature of the batch was kept between -2° and -1° C. during the addition
  7. temperatureto warm to 18° C. over 30 minutes
  8. temperatureThe temperature was then increased to 28° C.
  9. waitheld for 1 hour
  10. additionthe solution treated with charcoal (4.5 g, Fisons) for 15 minutes
  11. customThe charcoal was removed
  12. customthe precipitated base collected
  13. washwashed with water (2×30 ml)
  14. customdried (16 hours at 35° C. in vacuo)

출처 및 근거

ORD 기록
ord-6a32cf1ea0994d4c83f63fe40e16771f
출처 데이터셋
uspto-grants-1996_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05567819

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트