홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dimethylformamide → 1-Benzyl-5-nitro-1H-indazole

HRID 895655
인쇄

반응식

HRID 895655 반응식
CN(C=O)C.[N+:6]([C:9]1[CH:10]=[C:11]2[C:15](=[CH:16][CH:17]=1)[NH:14][N:13]=[CH:12]2)([O-:8])=[O:7].C(=O)([O-])[O-].[K+].[K+].[CH2:24](Br)[C:25]1[CH:30]=[CH:29][CH:28]=[CH:27][CH:26]=1>O.C(OCC)(=O)C>[CH2:24]([N:14]1[C:15]2[C:11](=[CH:10][C:9]([N+:6]([O-:8])=[O:7])=[CH:17][CH:16]=2)[CH:12]=[N:13]1)[C:25]1[CH:30]=[CH:29][CH:28]=[CH:27][CH:26]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 6228DimethylformamideHCID 7498Benzyl BromideHCID 11430Potassium CarbonateHCID 215015-Nitroindazole

생성물 1

HCID 219520821-Benzyl-5-nitro-1H-indazole수율 41%

시약·촉매·용매 2

HCID 962Water용매
HCID 8857
Ethyl Acetate
용매

반응 조건

온도
75 °C

실험 절차

A 12 L 3-necked round-bottomed flask was charged with DMF (2 L), 5-nitroindazole (200 g, 1.22 mol.) and potassium carbonate (186 g, 1.35 mol). Benzyl bromide (230 g, 1.35 mol) was then added to the stirred suspension at a rate as to maintain the temperature below 40° C. Once the addition was complete the mixture was heated to 75° C. for a further 8 hours, the reaction being monitored by TLC (SiO2, 1:1 ethyl acetate:hexanes). The reaction was then cooled to room temperature, water (2 L) added and the resulting slurry stirred at room temperature for 0.5 h. The resulting yellow solids were filtered off and dried at 45° C. and 5 mm Hg vacuum for 48 h. This afforded 424 g of a 1.25:1 mixture of 1- and 2-benzyl-5-nitroindazoles as determined by HPLC analysis (Rt 1-benzyl=14.9 min, Rt 2-benzyl=14.1 min). This material was then split into four approximately 100 g batches and each batch dissolved in acetone (470 mL). Water (156 mL) was then added slowly as a steady stream. After stirring for an additional 1 hour at room temperature the resulting solids were filtered off and vacuum dried. This process afforded a combined total of 126 g (41%) of 1-benzyl-5-nitroindazole, which was 92.1% pure by HPLC analysis, the major contaminant being the 2-benzyl derivative.

후처리

  1. temperatureto maintain the temperature below 40° C
  2. additionOnce the addition
  3. temperatureThe reaction was then cooled to room temperature
  4. filtrationThe resulting yellow solids were filtered off
  5. customdried at 45° C.
  6. wait5 mm Hg vacuum for 48 h
  7. additionThis afforded 424 g of a 1.25:1 mixture of 1- and 2-benzyl-5-nitroindazoles
  8. customas determined by HPLC analysis (Rt 1-benzyl=14.9 min, Rt 2-benzyl=14.1 min)
  9. customThis material was then split into four approximately 100 g batches
  10. dissolutioneach batch dissolved in acetone (470 mL)
  11. additionWater (156 mL) was then added slowly as a steady stream
  12. stirringAfter stirring for an additional 1 hour at room temperature the resulting solids
  13. filtrationwere filtered off
  14. customvacuum dried

출처 및 근거

ORD 기록
ord-c1a5b885e47f4216aad5a5972704b5f7
출처 데이터셋
uspto-grants-2005_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06916815B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트