참여 물질
| 역할 | 이름 | HCID | 투입량 |
|---|
| 반응물 | Methacrylic Acid | HCID 4093 | — |
| 반응물 | Ethylenediaminetetraacetic Acid | HCID 6049 | — |
| 반응물 | Ethyl Acrylate | HCID 8821 | — |
| 반응물 | Acrylonitrile butadiene styrene | HCID 24756 | — |
| 반응물 | Sodium dodecylbenzene sulphonate | HCID 57371080 | — |
| 용매 | Acetic Acid | HCID 176 | — |
| 용매 | Water | HCID 962 | — |
| 용매 | Ethyl Acetate | HCID 8857 | — |
| 생성물 | 2-Methylprop-2-enoic acid--ethyl prop-2-enoate (1/1) | HCID 107665 | — |
반응 단계
Into an agitated reactor are placed 981 g of a 1900 A butadiene/styrene/acrylonitrile (93/5/2) rubber latex (37.2% solids), 388 g of water, 0.255 g of K2S2O8, and 0.085 g of EDTA.2Na+. The pH of the mixture is adjusted to 3.5 using acetic acid. The mixture is then heated to 65° C. At this point two continuous addition (conadd) feed streams are started and added over a one hour period. One is 72 g of an aqueous stream consisting of 2.12% sodium dodecylbenzene sulfonate. The other stream is 87 g of a monomer mixture of 95.6% ethyl acrylate and 4.4% methacrylic acid. The mixture is heated at 65° C. for 4 hours after the conadd streams are finished. The AgAg particles produced consist of 20% shell, the shell consisting of about 95.6% EA and 4.4% MAA.
출처 및 근거
| DOI | 10.6084/m9.figshare.5104873.v1 |
|---|
| 특허 번호 | US04419496 |
|---|
| 출처 데이터셋 | uspto-grants-1983_12 |
|---|
| ORD ID | ord-2098ff258ceb47bfb8920b514fc5c4de |
|---|
| 출처 메모 | uspto-grants-1983_12 |
|---|
