홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

O-Phenylenediamine → 2-(1H-benzo[d]imidazol-2-yl)-5-methylbenzenamine

HRID 921025
인쇄

반응식

HRID 921025 반응식
OOS([O-])=O.[K+].[N+:7]([C:10]1[CH:17]=[C:16]([CH3:18])[CH:15]=[CH:14][C:11]=1[CH:12]=O)([O-])=O.[NH2:19][C:20]1[CH:25]=[CH:24][CH:23]=[CH:22][C:21]=1[NH2:26].C(=O)([O-])[O-].[K+].[K+]>CN(C=O)C.O>[NH2:7][C:10]1[CH:17]=[C:16]([CH3:18])[CH:15]=[CH:14][C:11]=1[C:12]1[NH:19][C:20]2[CH:25]=[CH:24][CH:23]=[CH:22][C:21]=2[N:26]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 7243O-PhenylenediamineHCID 11430Potassium CarbonateHCID 5904464-Methyl-2-nitrobenzaldehydeHCID 23707502Potassium hydroxy sulfite

생성물 1

HCID 679955852-(1H-benzo[d]imidazol-2-yl)-5-methylbenzenamine

시약·촉매·용매 2

HCID 962Water용매2회
HCID 6228Dimethylformamide용매

반응 조건

온도
20 °C

실험 절차

33.8 g (55 mmol) of oxone [70693-62-8] are added in portions to a solution of 13.5 g (100 mmol) of 2-nitro-4-methylbenzaldehyde [20357-22-6] and 11.9 g (110 mmol) of 1,2-diaminobenzene in a mixture of 150 ml of DMF and 5 ml of water with stirring and cooling to 20° C. at such a rate that the temperature does not exceed 35° C. The reaction mixture is subsequently stirred at room temperature until conversion of the aldehyde is complete (about 4 h). The reaction mixture is stirred into a solution of 40 g of potassium carbonate in 2000 ml of water, stirred for a further 15 min., extracted with three 300 ml portions of dichloromethane in each case, the organic phase is washed twice with 300 ml of water, once with 500 ml of sat. sodium chloride solution and dried over sodium sulfate. The dichloromethane solution is filtered through silica gel, and the dichloromethane is removed in vacuo. The yellow residue is taken up in 500 ml of methanol, blanketed with nitrogen with stirring, 3 g of 10% Pd/C are added, and the mixture is hydrogenated at room temperature in an autoclave at a hydrogen pressure of 2 bar. When the uptake of hydrogen is complete, the catalyst is filtered off via a Celite bed, and the methanol is removed in vacuo. Yield: 18.5 g (83 mmol), 83%. Purity: >95% according to 1H-NMR.

후처리

  1. customdoes not exceed 35° C
  2. custom(about 4 h)
  3. stirringstirred for a further 15 min.
  4. extractionextracted with three 300 ml portions of dichloromethane in each case
  5. washthe organic phase is washed twice with 300 ml of water, once with 500 ml of sat. sodium chloride solution
  6. dry with materialdried over sodium sulfate
  7. filtrationThe dichloromethane solution is filtered through silica gel
  8. customthe dichloromethane is removed in vacuo
  9. stirringwith stirring
  10. addition3 g of 10% Pd/C are added
  11. customis hydrogenated at room temperature in an autoclave at a hydrogen pressure of 2 bar
  12. filtrationthe catalyst is filtered off via a Celite bed
  13. customthe methanol is removed in vacuo

출처 및 근거

ORD 기록
ord-5d882c263986494abf37585cba10a6a5
출처 데이터셋
uspto-grants-2016_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09273080B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트