Aluminium lithium hydride → HCID 89656277, 화합물

HRID 930912노트

반응식

HRID 930912 반응식
[F:1][C:2]1[CH:34]=[C:33]([F:35])[CH:32]=[CH:31][C:3]=1[O:4][C:5]1[CH:10]=[CH:9][C:8]([S:11]([CH3:14])(=[O:13])=[O:12])=[CH:7][C:6]=1[C:15]1[C:16]2[CH:25]=[C:24]([C:26](OCC)=[O:27])[NH:23][C:17]=2[C:18](=[O:22])[N:19]([CH3:21])[CH:20]=1.[H-].[Al+3].[Li+].[H-].[H-].[H-]>O1CCCC1>[F:1][C:2]1[CH:34]=[C:33]([F:35])[CH:32]=[CH:31][C:3]=1[O:4][C:5]1[CH:10]=[CH:9][C:8]([S:11]([CH3:14])(=[O:12])=[O:13])=[CH:7][C:6]=1[C:15]1[C:16]2[CH:25]=[C:24]([CH2:26][OH:27])[NH:23][C:17]=2[C:18](=[O:22])[N:19]([CH3:21])[CH:20]=1

참가 물질

4

반응물 2

HCID 21226445Aluminium lithium hydrideHCID 89657495HCID 89657495, 화합물

생성물 1

HCID 89656277HCID 89656277, 화합물수율 55%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매

반응 조건

온도
0 °C

실험 절차

To a suspension of Example 252f (0.20 g, 0.40 mmol) in tetrahydrofuran (5 mL) stirring at 0° C. was added lithium aluminum hydride (1M in tetrahydrofuran, 0.398 mL, 0.398 mmol) and the mixture was stirred at 0° C. for two hours. The solvent was evaporated under reduced pressure and the residue was partitioned between ethyl acetate (30 mL) and water (20 mL). The mixture was filtered to remove the undissolved materials. The aqueous layer was extracted with ethyl acetate (2×30 mL). The combined organic layers were dried over anhydrous sodium sulfate, filtered, and concentrated. The residue was triturated with dichloromethane and the resulting solid was filtered and dried to provide the title compound (0.10 g, 55% yield). 1H NMR (400 MHz, DMSO-d6) δ ppm 11.91 (s, 1H), 7.97 (d, J=2.4 Hz, 1H), 7.86 (dd, J=2.4, 6.4 Hz, 1H), 7.56-7.38 (m, 3H), 7.20-7.15 (m, 1H), 6.97 (d, J=8.4 Hz, 1H), 6.18 (s, 1H), 5.11 (t, J=5.6 Hz, 1H), 4.50 (d, J=5.6 Hz, 2H), 3.57 (s, 3H), 3.16 (s, 3H). MS (ESI+) m/z 461.2 (M+H)+.

후처리

  1. customThe solvent was evaporated under reduced pressure
  2. customthe residue was partitioned between ethyl acetate (30 mL) and water (20 mL)
  3. filtrationThe mixture was filtered
  4. customto remove the undissolved materials
  5. extractionThe aqueous layer was extracted with ethyl acetate (2×30 mL)
  6. dry with materialThe combined organic layers were dried over anhydrous sodium sulfate
  7. filtrationfiltered
  8. concentrationconcentrated
  9. customThe residue was triturated with dichloromethane
  10. filtrationthe resulting solid was filtered
  11. customdried

출처 및 근거

ORD 기록
ord-b565aeececdd46c0bf15668197567d27
출처 데이터셋
uspto-grants-2016_03
특허 번호
US09296741B2

반응 노트

불러오는 중…