홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

1H-1,2,4-Triazole, 1-methyl- → 1-{(2S,4R)-1-benzyl-4-(t-butyldimethylsilyloxy) pyrrolidin-2-yl}-1-(1-methyl-1,2,4-triazol-5-yl) methanol

HRID 975677
노트
인쇄 미리보기

반응식

HRID 975677 반응식
[CH3:1][N:2]1[CH:6]=[N:5][CH:4]=[N:3]1.C([Li])CCC.[CH2:12]([N:19]1[CH2:23][C@H:22]([O:24][Si:25]([C:28]([CH3:31])([CH3:30])[CH3:29])([CH3:27])[CH3:26])[CH2:21][C@H:20]1[CH:32]=[O:33])[C:13]1[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=1>O1CCCC1.CCCCCC>[CH2:12]([N:19]1[CH2:23][C@H:22]([O:24][Si:25]([C:28]([CH3:29])([CH3:30])[CH3:31])([CH3:27])[CH3:26])[CH2:21][C@H:20]1[CH:32]([C:6]1[N:2]([CH3:1])[N:3]=[CH:4][N:5]=1)[OH:33])[C:13]1[CH:14]=[CH:15][CH:16]=[CH:17][CH:18]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 224591H-1,2,4-Triazole, 1-methyl-HCID 50922891(2S,4R)-1-benzyl-2-formyl-4-(t-butyldimethylsilyloxy)pyrrolidineHCID 178418339Butyllithium

생성물 1

HCID 544516311-{(2S,4R)-1-benzyl-4-(t-butyldimethylsilyloxy) pyrrolidin-2-yl}-1-(1-methyl-1,2,4-triazol-5-yl) methanol수율 48.9%

시약·촉매·용매 2

HCID 8028Tetrahydrofuran
용매
2회
HCID 8058Hexane용매

반응 조건

온도
0 °C

실험 절차

To a solution of 1-methyl-1,2,4-triazole (3.12 g) in tetrahydrofuran (47 ml) at -70° C. was added dropwise n-butyllithium (1.6N) in hexane (25.5 ml) keeping the temperature below -60° C. After 15 minutes at -70° C., the mixture was warmed quickly to 0° C., stirred 5 minutes then recooled to -70° C. and stirred for 30 minutes. To the mixture was added a solution of (2S,4R)-1-benzyl-4-(t-butyldimethylsilyloxy)-2-formylpyrrolidine (10.0 g) in tetrahydrofuran (10 ml) keeping the temperature below -60° C. After 30 minutes the cooling bath was removed and the mixture was warmed to 0° C. over 30 minutes. After a further 2 hours the mixture was quenched with saturated sodium bicarbonate solution and extracted with ethyl acetate (×2). The combined organic layer was washed with brine and water, dried over magnesium sulfate and evaporated under reduced pressure. The residue was column chromatographed on silica gel (300 g, eluting with chloroform-methanol (30:1)) and then again on silica gel (300 g) eluting with ethyl acetate) to give 1-{(2S,4R)-1-benzyl-4-(t-butyldimethylsilyloxy) pyrrolidin-2-yl}-1-(1-methyl-1,2,4-triazol-5-yl) methanol (6.16 g) (as a 4.3:1 mixture of diastereoisomers).

후처리

  1. customthe temperature below -60° C
  2. customthen recooled to -70° C.
  3. stirringstirred for 30 minutes
  4. customthe temperature below -60° C
  5. customAfter 30 minutes the cooling bath was removed
  6. temperaturethe mixture was warmed to 0° C. over 30 minutes
  7. customAfter a further 2 hours the mixture was quenched with saturated sodium bicarbonate solution
  8. extractionextracted with ethyl acetate (×2)
  9. washThe combined organic layer was washed with brine and water
  10. dry with materialdried over magnesium sulfate
  11. customevaporated under reduced pressure
  12. customchromatographed on silica gel (300 g, eluting with chloroform-methanol (30:1))
  13. washagain on silica gel (300 g) eluting with ethyl acetate)

출처 및 근거

ORD 기록
ord-c2522a2cd7514d7aa1ac2117a15d0329
출처 데이터셋
uspto-grants-1997_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05608056

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트