홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Pyridine → Octylisothiazolon

HRID 982166
인쇄

반응식

HRID 982166 반응식
[C:1](O)(=O)[CH2:2]CSSCCC(O)=O.Cl[C:14]1[CH:19]=CC=[CH:16][CH:15]=1.[S:20](Cl)(Cl)=[O:21].[N:24]1[CH:29]=[CH:28][CH:27]=[CH:26][CH:25]=1>>[CH2:28]([C:29]1[CH:2]=[CH:1][S:20](=[O:21])[N:24]=1)[CH2:27][CH2:26][CH2:25][CH2:19][CH2:14][CH2:15][CH3:16]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 4

HCID 1049PyridineHCID 7964ChlorobenzeneHCID 24386Thionyl Chloride2회HCID 951163,3'-Dithiodipropionic acid

생성물 1

HCID 57212145Octylisothiazolon

반응 조건

온도
45 °C

실험 절차

To a 500 ml flask fitted with a mechanical stirrer, nitrogen inlet, and an outlet to a 10% sodium hydroxide trap was charged 20g(0.095M) of 3,3'-dithiodipropionic acid, 200 ml of chlorobenzene and 0.25 ml of pyridine. An addition funnel containing 24.9 g (0.21 M) of thionyl chloride was added and the thionyl chloride was added dropwise. The mixture was warmed to 45° C. and stirred for 2.5 hours. The mixture was not homogeneous and was stirred overnight. (The reaction was still not quite homogeneous but was carried on at this point.) The mixture was reheated to 45° C. and sparged for 15 min with nitrogen. The remaining thionyl chloride was removed by stripping under house vaccuum for 1 hr and then 50 ml of chlorobenzene was charged. The mixture was cooled to -20° C. and 6.8 g (0.096 M) of chlorine was added over 16 min. After stirring 0.5hr the mixture was warmed to 0°-5° C. and a solution of 24.6 g (0.188 M) of n-octyl amine and 9.2 g (0.188 M) of triethyl amine in 100 ml of chlorobenzene was added dropwise such that the reaction temperature remained below 5° C. (addition time 1.75 hr). The solution was allowed to warm and then heated to 35° C. During this time the reaction thickened and then thinned out. Chlorine (13.5 g, 0.19 M) was then fed over 40 min at 35° C. and the mixture was stirred for an additional 1 hr. The reaction mixture was washed with 3×400 ml of water and then the solvent was removed under vaccuum to yield 36g of 3-n-octylisothiazolone as a dark oil. Analysis by capillary gas chromatography indicated a yield of 21.8 g (53.7%) of 3-n-octylisothiazolone.

후처리

  1. customTo a 500 ml flask fitted with a mechanical stirrer, nitrogen inlet, and an outlet to a 10% sodium hydroxide trap
  2. additionwas added
  3. stirringwas stirred overnight
  4. customwas reheated to 45° C.
  5. customsparged for 15 min with nitrogen
  6. customThe remaining thionyl chloride was removed
  7. waitby stripping under house vaccuum for 1 hr
  8. addition50 ml of chlorobenzene was charged
  9. temperatureThe mixture was cooled to -20° C.
  10. addition6.8 g (0.096 M) of chlorine was added over 16 min
  11. stirringAfter stirring 0.5hr the mixture
  12. temperaturewas warmed to 0°-5° C.
  13. additiona solution of 24.6 g (0.188 M) of n-octyl amine and 9.2 g (0.188 M) of triethyl amine in 100 ml of chlorobenzene was added dropwise such that the reaction temperature
  14. customremained below 5° C.
  15. addition(addition time 1.75 hr)
  16. temperatureto warm
  17. temperatureheated to 35° C
  18. waitChlorine (13.5 g, 0.19 M) was then fed over 40 min at 35° C.
  19. stirringthe mixture was stirred for an additional 1 hr
  20. washThe reaction mixture was washed with 3×400 ml of water
  21. customthe solvent was removed under vaccuum

출처 및 근거

ORD 기록
ord-76e3be0b508542d9aeb8425da98424d1
출처 데이터셋
uspto-grants-1991_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04994574

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트