홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → Stavudine

HRID 988756
인쇄

반응식

HRID 988756 반응식
[CH3:1][C:2]1[C:8](=[O:9])[NH:7][C:5](=[O:6])[N:4]([C@@H:10]2[O:14][C@H:13]([CH2:15][OH:16])[CH:12]=[CH:11]2)[CH:3]=1.CC(N(C)C)=O.O>CC(C)=O>[CH3:1][C:2]1[C:8](=[O:9])[NH:7][C:5](=[O:6])[N:4]([C@@H:10]2[O:14][C@H:13]([CH2:15][OH:16])[CH:12]=[CH:11]2)[CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 962WaterHCID 11722976Stavudine DMA

생성물 1

HCID 18283Stavudine수율 76%

시약·촉매·용매 1

HCID 180Acetone용매

반응 조건

온도
500 °C

실험 절차

The Stavudine-DMA solvate (15.2 g, 0.0488 mole) was combined with water (2.74 g) and acetone (220 mL) and heated to 500° C. when only a few grains of solid remained. The hot solution was filtered to remove the remaining solid, the filtrate was distilled until about 55 mL of acetone remained. The solution was allowed to cool on its own and at about 35-40° C. it was seeded with pure Stavudine. After 70 minutes of cooling on its own it was placed on an ice-water bath for one hour. The mixture was filtered, washed with acetone (2×11 mL) and air dried to give 8.32 g (0.0371 mole, 76.0%) of pure white Stavudine. The HPLC results are given in Table 2.

후처리

  1. filtrationThe hot solution was filtered
  2. customto remove the remaining solid
  3. distillationthe filtrate was distilled until about 55 mL of acetone
  4. temperatureto cool on its own
  5. customat about 35-40° C.
  6. temperatureAfter 70 minutes of cooling on its own it
  7. filtrationThe mixture was filtered
  8. washwashed with acetone (2×11 mL) and air
  9. customdried

출처 및 근거

ORD 기록
ord-3f9296b71e4f471ba5ca92134763fa28
출처 데이터셋
uspto-grants-2003_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06635753B1

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트