2-butyl-1-(2-methylpropyl)-1H-imidazo[4,5-c][1,7]naphthyridin-4-amine → 6,7,8,9-tetrahydro-2-butyl-1-(2-methylpropyl)-1H-imidazo[4,5-c][1,7]naphthyridin-4-amine

HRID 989087노트

반응식

HRID 989087 반응식
[CH2:1]([C:5]1[N:6]([CH2:19][CH:20]([CH3:22])[CH3:21])[C:7]2[C:16]3[CH:15]=[CH:14][N:13]=[CH:12][C:11]=3[N:10]=[C:9]([NH2:17])[C:8]=2[N:18]=1)[CH2:2][CH2:3][CH3:4].[H][H]>FC(F)(F)C(O)=O.[Pt]=O>[CH2:1]([C:5]1[N:6]([CH2:19][CH:20]([CH3:21])[CH3:22])[C:7]2[C:16]3[CH2:15][CH2:14][NH:13][CH2:12][C:11]=3[N:10]=[C:9]([NH2:17])[C:8]=2[N:18]=1)[CH2:2][CH2:3][CH3:4]

참가 물질

5

반응물 2

HCID 120158142-butyl-1-(2-methylpropyl)-1H-imidazo[4,5-c][1,7]naphthyridin-4-amineHCID 178418361HCID 178418361, 화합물

생성물 1

HCID 120185306,7,8,9-tetrahydro-2-butyl-1-(2-methylpropyl)-1H-imidazo[4,5-c][1,7]naphthyridin-4-amine

시약·촉매·용매 2

HCID 82844Platinum oxide (PtO)촉매HCID 6422Trifluoroacetic acid용매

실험 절차

A catalytic amount of platinum oxide was added to a solution of 2-butyl-1-(2-methylpropyl)-1H-imidazo[4,5-c][1,7]naphthyridin-4-amine (0.5 g, 1.68 mol)) in trifluoroacetic acid (20 mL). The reaction mixture was reduced on a Parr apparatus at 50 psi (3.5 Kg/cm2) hydrogen pressure overnight. The reaction mixture was filtered and washed with methanol to remove the catalyst. The filtrate was concentrated under vacuum. The residue was combined with dichloromethane and aqueous sodium bicarbonate was added until the mixture was basic. The dichloromethane layer was separated. The aqueous layer was extracted three times with dichloromethane (100 mL). The dichloromethane extracts were combined, dried over magnesium sulfate and concentrated under vacuum. The resulting residue was recrystallized from toluene then purified by flash chromatography (silica gel eluting with 20% methanol in dichloromethane with a trace of ammonium hydroxide) to provide 6,7,8,9-tetrahydro-2-butyl-1-(2-methylpropyl)-1H-imidazo[4,5-c][1,7]naphthyridin-4-amine as a solid, m.p. 164-166° C. Analysis: Calculated for C17H27N5+0.5H2O: %C, 65.77; %H, 9.09; %N, 22.56; Found: %C, 65.99; %H, 8.71; %N, 22.23.

후처리

  1. filtrationThe reaction mixture was filtered
  2. washwashed with methanol
  3. customto remove the catalyst
  4. concentrationThe filtrate was concentrated under vacuum
  5. additionwas added until the mixture
  6. customThe dichloromethane layer was separated
  7. extractionThe aqueous layer was extracted three times with dichloromethane (100 mL)
  8. dry with materialdried over magnesium sulfate
  9. concentrationconcentrated under vacuum
  10. customThe resulting residue was recrystallized from toluene
  11. customthen purified by flash chromatography (silica gel eluting with 20% methanol in dichloromethane with a trace of ammonium hydroxide)

출처 및 근거

ORD 기록
ord-d5cf03712ec44a8fbf30c5b69ddbc9ae
출처 데이터셋
uspto-grants-2003_10
특허 번호
US06638944B2

반응 노트

불러오는 중…