홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

HCID 178442263, 화합물 → Beta-Lapachone

HRID 990273
인쇄

반응식

HRID 990273 반응식
[CH3:1][C:2]([CH3:18])=[CH:3][CH2:4][C:5]1[C:15](=[O:16])[C:14]2[CH:13]=[CH:12][CH:11]=[CH:10][C:9]=2[C:7](=[O:8])[C:6]=1[OH:17]>S(=O)(=O)(O)O>[CH3:1][C:2]1([CH3:18])[O:16][C:15]2[C:14]3[CH:13]=[CH:12][CH:11]=[CH:10][C:9]=3[C:7]([C:6](=[O:17])[C:5]=2[CH2:4][CH2:3]1)=[O:8]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 1

HCID 178442263HCID 178442263, 화합물

생성물 1

HCID 3885Beta-Lapachone

시약·촉매·용매 1

HCID 1118Sulfuric Acid용매

반응 조건

온도
80 °C

실험 절차

Into a 1,000 ml beaker containing sulfuric acid (300 ml), lapachol (30 g, 0.124 mol) was added in portions slowly over 5 minutes at room temperature while stirring vigorously. After addition, the dark mixture was stirred for an additional 30 min and then poured into ice water (800 g) with manual stirring in a 2,000 ml beaker. The mixture was transferred into a 2,000 ml separatory funnel and extracted twice with toluene (600 ml and 400 ml). The toluene phases were pooled and washed successively with 1% aqueous sodium chloride (800 ml), 1% aqueous sodium bicarbonate (400 ml) and 1% aqueous sodium chloride (800 ml), and then dried with sodium sulfate (50 g). After filtration, the filtrate was evaporated to dryness by Rotovap and then ethanol (300 ml) was added for co-evaporation to completely remove residual toluene. The residue was dissolved in 75% ethanol or absolute ethanol, preferably absolute ethanol (ethanol/water, 3:1, 300 ml) with heating in an 80° C. water bath, then was filtered and cooled to 4° C. slowly. Pure β-lapachone was isolated by filtration, then washed with cold 75% ethanol (4° C., 100 ml), dried under vacuum, packed under Argon atmosphere and stored at −20° C. in the dark.

후처리

  1. additionwas added in portions slowly over 5 minutes at room temperature
  2. additionAfter addition
  3. stirringthe dark mixture was stirred for an additional 30 min
  4. stirringstirring in a 2,000 ml beaker
  5. customThe mixture was transferred into a 2,000 ml separatory funnel
  6. extractionextracted twice with toluene (600 ml and 400 ml)
  7. washwashed successively with 1% aqueous sodium chloride (800 ml), 1% aqueous sodium bicarbonate (400 ml) and 1% aqueous sodium chloride (800 ml)
  8. dry with materialdried with sodium sulfate (50 g)
  9. filtrationAfter filtration
  10. customthe filtrate was evaporated to dryness by Rotovap
  11. additionethanol (300 ml) was added for co-evaporation to completely remove residual toluene
  12. dissolutionThe residue was dissolved in 75% ethanol
  13. filtrationwas filtered
  14. temperaturecooled to 4° C. slowly

출처 및 근거

ORD 기록
ord-e0b516c9a5bb4144bcf52b3cc8afa580
출처 데이터셋
uspto-grants-2002_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06458974B1

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트