Back
HuagongsheHuagongshe Chemistry Print Report · For research reference only
HRID 1058119Generated: November 1, 2026

Indole → 3-m-Nitrobenzoylindole

https://huagongshe.com/reaction/1058119

Reaction equation

Participants

RoleNameHCIDCharge
ReactantIndoleHCID 798—
ReactantBenzoyl chloride, 3-nitro-HCID 8495—
ReactantAmmonium ChlorideHCID 25517—
ReactantMagnesiumHCID 5462224—
ReactantHCID 178448191HCID 178448191—
SolventTolueneHCID 1140—
SolventTriethylamineHCID 8471—
Product3-m-NitrobenzoylindoleHCID 983820680.3%

Reaction Conditions

Temperature37.5 °C

Reaction Steps

Magnesium (2.08 g), toluene (40 ml), triethylamine (10.4 g) were put into a 3″ diameter flask, and the internal temperature was raised to 30 to 45° C. A solution of 1-iodebutane (18.9 g) in toluene was added under stirring at an internal temperature of 30 to 45° C. After stirring for two hours at the same temperature, the temperature was lowered to 0 to 5° C., thereby preparing a solution of iode n-butylmagnesium in toluene. To this prepared Grignard reagent, indole (10.0 g) dissolved beforehand in toluene (25 ml) was added at an internal temperature of 0 to 10° C., and a reaction was carried out for about one hour at the same temperature to synthesize iodeindole-1-ylmagnesium. Then, m-nitrobenzoyl chloride (15.8 g) and toluene (60 ml) were put into another 3″ diameter flask, and the internal temperature was lowered to below −15° C. The slurry of the iodeindole-1-ylmagnesium prepared previously was added to the solution of this acid chloride while keeping the internal temperature at −15 to −10° C., and the mixture was stirred for more one hour at the same temperature. The internal temperature was then raised further to 20 to 25° C., and the mixture was stirred for one hour. After this reaction, the mixture was added to an aqueous ammonium chloride solution (16 g, 60 ml) prepared beforehand in another 3″ diameter flask at 10° C. or less to carry out quenching. Acetone (220 ml) was added thereto, the internal temperature was raised to 50 to 65° C., and dissolution was carried out, followed by separation. The organic layer of the upper layer was then collected and cleaned with an aqueous 5% sodium hydrogencarbonate solution at the same temperature. The solvent was evaporated so as to be concentrated to about 50 ml. After cooled to an internal temperature of 2 to 10° C., a precipitated crystal was filtered. The filtered crystal was cleaned with toluene (10 ml) and dried to obtain a crystal of 3-m-nitrobenzoylindole (18.2 g) (80.0% yield).

Provenance & Evidence

DOI10.6084/m9.figshare.5104873.v1
Patent numberUS06515141B1
Source datasetuspto-grants-2003_02
ORD IDord-652d5e4c4db84b108cecaa5f9ba685ce
Source noteuspto-grants-2003_02